Ryan McCormick > 1986 Ford Bronco > open folder Saginaw swap

Left: original pump. Center: Ford HD pump. Right: Saginaw pump. Notice the outputs, i use the cen...
Hits: 1596
Size: 16.79 KB
Posted: 6/29/03
Left: original pump. Center: Ford HD pump. Right: Saginaw pump. Notice the outputs, i use the cen...		Saginaw bracket on the Left, found on vans. Or part # F4UZ3C511A for around $45-$50 at your local D...
Hits: 1697
Size: 26.03 KB
Posted: 6/29/03
Saginaw bracket on the Left, found on vans. Or part # F4UZ3C511A for around $45-$50 at your local D...		Rear view of both pumps. notice the Sag pump output is straight back, while the original pump goes ...
Hits: 1437
Size: 43.75 KB
Posted: 6/29/03
Rear view of both pumps. notice the Sag pump output is straight back, while the original pump goes ...		Directions on Case / Pump replacement
Hits: 1317
Size: 45.61 KB
Posted: 6/29/03
Directions on Case / Pump replacement		Top: stock Bronco hp hose. Bottom: stock van return line. I used the stock Bronco HP hose which is...
Hits: 1174
Size: 40.78 KB
Posted: 6/29/03
Top: stock Bronco hp hose. Bottom: stock van return line. I used the stock Bronco HP hose which is...
This is a shot of the back of MY pump. The output is rotatable to align with the hose direction.
Hits: 1102
Size: 17.89 KB
Posted: 6/29/03
This is a shot of the back of MY pump. The output is rotatable to align with the hose direction.		Van high pressure line enters steering box (steel line at right angle). Also visible: return line en...
Hits: 1158
Size: 39.22 KB
Posted: 6/29/03
Van high pressure line enters steering box (steel line at right angle). Also visible: return line en...		Here's how the stock van high pressure line sits around the steering box. Notice how ackward it is.
Hits: 1188
Size: 39.46 KB
Posted: 6/29/03
Here's how the stock van high pressure line sits around the steering box. Notice how ackward it is.		Old pump removed, new pump ready to go in. They both bolt to the Heads and one bolt on the water pu...
Hits: 1100
Size: 34.21 KB
Posted: 6/29/03
Old pump removed, new pump ready to go in. They both bolt to the Heads and one bolt on the water pu...		This is MY Sag pump. I used the Older can, the ARG super pump, and a rotatable output. I can use t...
Hits: 1283
Size: 53.3 KB
Posted: 6/29/03
This is MY Sag pump. I used the Older can, the ARG super pump, and a rotatable output. I can use t...
Mounted on 5.0L Bronco, this one has the pully to drive a York onboard air.
Hits: 1170
Size: 36.2 KB
Posted: 6/29/03
Mounted on 5.0L Bronco, this one has the pully to drive a York onboard air.		Another mount on a 1982 4.9L Bronco. This one has the HD case, notice how the high presure outlet w...
Hits: 1318
Size: 70.61 KB
Posted: 6/29/03
Another mount on a 1982 4.9L Bronco. This one has the HD case, notice how the high presure outlet w...		Another mount on a 5.8L Bronco, with stock pully and canister
Hits: 1313
Size: 53.84 KB
Posted: 6/29/03
Another mount on a 5.8L Bronco, with stock pully and canister		  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog