Ryan McCormick > 1986 Ford Bronco > open folder Saginaw swap

Left: original pump. Center: Ford HD pump. Right: Saginaw pump. Notice the outputs, i use the cen...
Url
Tag
Img
Thumb
Saginaw bracket on the Left, found on vans. Or part # F4UZ3C511A for around $45-$50 at your local D...
Url
Tag
Img
Thumb
Rear view of both pumps. notice the Sag pump output is straight back, while the original pump goes ...
Url
Tag
Img
Thumb
Directions on Case / Pump replacement
Url
Tag
Img
Thumb
Top: stock Bronco hp hose. Bottom: stock van return line. I used the stock Bronco HP hose which is...
Url
Tag
Img
Thumb
This is a shot of the back of MY pump. The output is rotatable to align with the hose direction.
Url
Tag
Img
Thumb
Van high pressure line enters steering box (steel line at right angle). Also visible: return line en...
Url
Tag
Img
Thumb
Here's how the stock van high pressure line sits around the steering box. Notice how ackward it is.
Url
Tag
Img
Thumb
Old pump removed, new pump ready to go in. They both bolt to the Heads and one bolt on the water pu...
Url
Tag
Img
Thumb
This is MY Sag pump. I used the Older can, the ARG super pump, and a rotatable output. I can use t...
Url
Tag
Img
Thumb
Mounted on 5.0L Bronco, this one has the pully to drive a York onboard air.
Url
Tag
Img
Thumb
Another mount on a 1982 4.9L Bronco. This one has the HD case, notice how the high presure outlet w...
Url
Tag
Img
Thumb
Another mount on a 5.8L Bronco, with stock pully and canister
Url
Tag
Img
Thumb
  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog