Drock96marquis > 1996 Mercury Grand Marquis > open folder LF Window Regulator Replacement

The driver's window regulator decided to snap while moving/driving the car for the first time this y...
Url
Tag
Img
Thumb
An overview of what had to be removed / drilled out to remove the regulator. The window glass must...
Url
Tag
Img
Thumb
The rivets which attach the glass to the regulator sliding mechanism are the most difficult to remov...
Url
Tag
Img
Thumb
Stupid door pull bracket in the way, but a shallow 11mm socket with a ratchet made it a minor inconv...
Url
Tag
Img
Thumb
A close-up of the door beam pictured and labeled above. The small black part in the bottom left is t...
Url
Tag
Img
Thumb
Drilling out the bottom rivets. Once you drill them out, before using a hammer and punch STABILIZE...
Url
Tag
Img
Thumb
The bottom rivet on the other side removed. As mentioned in an earlier pic, this hole is where the w...
Url
Tag
Img
Thumb
Old and new. The new regulator is an aftermarket Dorman part. Not my first choice, and I'd advise ...
Url
Tag
Img
Thumb
Snaking the new window regulator in. The replacement was secured using 1/4" hardware (bolts, ...
Url
Tag
Img
Thumb
With the glass removed, it's an ideal time to polish it out to remove any water spots/etching. I've...
Url
Tag
Img
Thumb
A picture speaks a thousand words. This little image from the service manual shows exactly how you n...
Url
Tag
Img
Thumb
    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog