SideView.jpg 639 hits | 69.06 KB | Posted: 3/8/06 Side shot of the voltage regulator (Posted in: Voltage Regulator Swap)
ScrewRemoved.jpg 682 hits | 79.45 KB | Posted: 3/8/06 When the screws are removed the voltage regulator will be pushed up by the brushes. (Posted in: Voltage Regulator Swap)
ScrewRemovedSide.jpg 683 hits | 60.07 KB | Posted: 3/8/06 Another shot with the screws removed. The regulator simply lifts out. (Posted in: Voltage Regulator Swap)
VoltReg3.pg.jpg 654 hits | 52.36 KB | Posted: 3/8/06 Voltage regulator. (The 2 screws in the picture hold the brush assembly to the regulator. T20 Torx bit) (Posted in: Voltage Regulator Swap)
VoltReg1.jpg 661 hits | 46.47 KB | Posted: 3/8/06 Side view....showing brush assembly (Posted in: Voltage Regulator Swap)
Brushes.jpg 671 hits | 65.01 KB | Posted: 3/8/06 This is the brush assembly bolted in place on the back of the voltage regulator (Posted in: Voltage Regulator Swap)
BrushesRemoved.jpg 657 hits | 54.12 KB | Posted: 3/8/06 When you remove the 2 screws....the brush assembly simply comes off of the regulator (Posted in: Voltage Regulator Swap)
BrushesRemovedTop.jpg 681 hits | 45.93 KB | Posted: 3/8/06 Another shot of the brushes removed (Posted in: Voltage Regulator Swap)
BrushRetainer.jpg 667 hits | 55.8 KB | Posted: 3/8/06 When you go to reinstall the regulator the brushes have to be held back into the housing. Use a paper clip to hold them in place. (Posted in: Voltage Regulator Swap)
Brushes1.jpg 646 hits | 54.66 KB | Posted: 3/8/06 With the retaining screws tight, press the brushes into the housing. (Posted in: Voltage Regulator Swap)
BrushesLocked.jpg 654 hits | 60.38 KB | Posted: 3/8/06 Here you can see that the brushes are held in place with the paper clip (Posted in: Voltage Regulator Swap)
BrushesLocked1.jpg 740 hits | 58.68 KB | Posted: 3/8/06 Another view of the brushes held in place (Posted in: Voltage Regulator Swap)
InstallingReg.jpg 669 hits | 76.66 KB | Posted: 3/8/06 To install, simply lay the regulator into place. (Posted in: Voltage Regulator Swap)
InstallingReg1.jpg 607 hits | 82.94 KB | Posted: 3/8/06 Ready to bolt in (Posted in: Voltage Regulator Swap)
InstallingReg2.jpg 650 hits | 77.12 KB | Posted: 3/8/06 Tighten the mounting bolts (Posted in: Voltage Regulator Swap)
RemovingLock.jpg 648 hits | 64.24 KB | Posted: 3/8/06 When the regulator is in place and screws tightened, pull the paper clip out. (Posted in: Voltage Regulator Swap)
RemovingLock1.jpg 671 hits | 66.17 KB | Posted: 3/8/06 You will hear the brushes pop out of the housing.....and your done! (Posted in: Voltage Regulator Swap)
Picture 001.jpg 2511 hits | 78.71 KB | Posted: 2/27/06 My John Deere Gator:
Mods include 2 channel amplifier w/ out door speakers under dash feed of std. headphone plug in glovebox; running lights on rear fenders; turn signals (compact LED lamps on frotn fenders); rear tailights/brakelights/reverse/tu... (Posted in: TECH/MISC -- Click for MISC tech pics-SEE SUBS)
