|
|
Hits: 1191
Size: 75.13 KB
Posted: 11/8/04
No Crown Vic/Grand Marquis ever had courtesy lamps in the rear doors. However, that did not stop me ... | 
Hits: 1078
Size: 53.14 KB
Posted: 11/8/04
Here are the lamps after a couple coats of primer. | 
Hits: 1102
Size: 45.39 KB
Posted: 11/8/04
A close-up of the lamp housing, after being painted with Ford OEM interior pant. | 
Hits: 993
Size: 51.03 KB
Posted: 11/8/04
Another pic. | 
Hits: 1025
Size: 71.12 KB
Posted: 11/8/04
The finished courtesy lamp. Now the housing matches the rest of the interior. |
Hits: 1173
Size: 49.31 KB
Posted: 11/8/04
The stock rear door. | 
Hits: 1298
Size: 43.24 KB
Posted: 11/8/04
To gain access to the wiring tunnel between the body and the door, you must remove the panel that co... | 
Hits: 1186
Size: 34.3 KB
Posted: 11/8/04
I used a coathanger to snake up through the door. Note the cut red wire and ground wire. Apparently ... | 
Hits: 1115
Size: 36.71 KB
Posted: 11/8/04
There is little space inside the doors, so I used pliers to grab the end of the coathanger and pull ... | 
Hits: 1136
Size: 30.46 KB
Posted: 11/8/04
The yellow and black wires that will provide power to the lamps, snaked through the door. |
Hits: 1021
Size: 48.53 KB
Posted: 11/8/04
The door panels, awaiting the installation of the courtesy lamps. | 
Hits: 1332
Size: 58.7 KB
Posted: 11/8/04
I used a hole saw to drill and a small drill bit to make the required holes. | 
Hits: 1221
Size: 57.26 KB
Posted: 11/8/04
The lamp, installed. | 
Hits: 1069
Size: 35.98 KB
Posted: 11/8/04
A closer view of the installed lamp. | 
Hits: 1252
Size: 46.09 KB
Posted: 11/8/04
The panel, with it's new courtesy lamp, re-installed on the door. |
Hits: 1213
Size: 39.25 KB
Posted: 11/8/04
A close-up of the finished lamp. | 
Hits: 1096
Size: 52.18 KB
Posted: 11/8/04
The finished door. | 
Hits: 1221
Size: 45.52 KB
Posted: 11/8/04
Here's the lamp, installed in the other door. Note the courtesy lamp that I also installed on the fr... | | |
Rear Door Courtesy Lamps