For some strange reason, Ford decided not to use the front marker lamps as turn signals or as flashe...
Url
Tag
Img
Thumb
Here you can see where I spliced into the turn signal wire and attached a new wire that will attach ...
Url
Tag
Img
Thumb
Cut the ground (black wire) on the marker lamp and attach it to the wire that is spliced on the turn...
Url
Tag
Img
Thumb
I wrapped up the new wire with wire loom and covered up the splice with a section of larger wire loo...
Url
Tag
Img
Thumb
Next, the marker lamp's ground wire is connected to the new wire from the turn signal. Be sure and c...
Url
Tag
Img
Thumb
There is less room to run wiring on the driver's side. I ended up removing the Marauder Airbox so I ...
Url
Tag
Img
Thumb
Here's a pic of the wire routing, viewed from the side. A screwdriver points to the new wire and it'...
Url
Tag
Img
Thumb
Here's a pic of the wire routing, viewed from where the headlights are typically mounted. Again, a s...
Url
Tag
Img
Thumb
Here's a video of this modification on Nell's Crown Vic. Please visit her site: http://www.crownvics...
Url
Tag
Img
Thumb
I replaced the tiny 194NA bulbs with the larger 916NA. Hopefully this will result in a brighter turn...
Url
Tag
Img
Thumb
One more pic to show the difference in size.
Url
Tag
Img
Thumb
I also replaced the amber 906 bulbs w/silver coated amber bulbs.
Url
Tag
Img
Thumb
The tools required to replace the marker lamp bulbs.
Url
Tag
Img
Thumb
Here's what the amber bulb looks like, installed.
Url
Tag
Img
Thumb
A close-up of the soon-to-be replaced amber 906 bulb.
Url
Tag
Img
Thumb
The silver lamp, installed.
Url
Tag
Img
Thumb
The silver lamp is barely visble when not illuminated.
Url
Tag
Img
Thumb
The cleaned up front end with silver 3457 turn signal bulbs and silver 906 marker lamp bulbs.
Url
Tag
Img
Thumb
  

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog