BagSpace (1).JPG
1033 hits | 57.41 KB | Posted: 5/13/05
hitch system... makes for a great hard bag mount

fin_plate.JPG
570 hits | 56.11 KB | Posted: 5/13/05
weld on a flat bracket piece to mount the bottom of the bags on

Fiberglass (4).JPG
544 hits | 56.1 KB | Posted: 5/13/05
if you can sling a little fiberglass, get some used bags and fix 'em up. If not... get help becouse...

Fiberglass (1).JPG
563 hits | 54.16 KB | Posted: 5/14/05
bags come with a channel for a bar mount.
cut inside bottoms flat with the braket mounting channel ...

BagIn_Braket.JPG
467 hits | 58.62 KB | Posted: 5/14/05
now we're getting somewhere...

tools.JPG
560 hits | 39.71 KB | Posted: 5/14/05
good stuff for this job. rubber is your friend

Fit2.JPG
561 hits | 43.09 KB | Posted: 5/14/05
start taking measurement and be carefull, fit is real tight here...

ClearSeat.JPG
624 hits | 56.55 KB | Posted: 5/14/05
gotta clear the seat (this stock seat was later swapped out for a nice corbin. gave me alot more ro...

ClearSwingArm.JPG
607 hits | 41.11 KB | Posted: 5/14/05
pay very close attention to the clearance for the softail swing arm. it would be a real drag to do ...

ClearTaillight.JPG
564 hits | 56.59 KB | Posted: 5/14/05
Check clearance for the taillights too. again this one is a very tight fit.

fin_platerubber.JPG
583 hits | 60.07 KB | Posted: 5/13/05
once you know where you have to sit those bags, drill out those holes. I also used a bit of rubber ...

fin_brackets.JPG
548 hits | 53.51 KB | Posted: 5/14/05
once the bags are properly set into the bottom, whip up some upper brackets to hang off the rear str...

fin_bagin.JPG
604 hits | 48.87 KB | Posted: 5/14/05
MOUNT THOSE BAGS!!!

fin_open.JPG
948 hits | 39.49 KB | Posted: 5/14/05
Assemble al lthe bag lids and hinges and locks, etc. etc.

fin_full_l.JPG
697 hits | 59.95 KB | Posted: 5/14/05
All together and seems to fit as if it was OEM

fin_full_back.JPG
968 hits | 26.61 KB | Posted: 5/14/05
all you'd ever see on the road... haha

hog@work (5).JPG
982 hits | 92.53 KB | Posted: 5/14/05
Of course this project had to be finished up with a complete paint job to bring it all together... m...