DSCF0221.JPG
931 hits | 50.91 KB | Posted: 6/24/08
My fuel lines were hole-y and rusted to pieces. Changed a few here and there in the Winter. Decided ...

DSCF0250.JPG
696 hits | 58.37 KB | Posted: 6/24/08
Tried to save long bits to copy the bends with. Worked quite well. I made them a little longer and c...

DSCF0225.JPG
615 hits | 77.31 KB | Posted: 6/24/08
These are all you really need to save yourself $1,000.00, which is what many a stealership will char...

DSCF0244.JPG
722 hits | 54.91 KB | Posted: 6/24/08
The 25 foot coil of 5/16" fuel line was $19.50 for the whole coil. I had several 1/4" coils laying a...

DSCF0227.JPG
662 hits | 30.16 KB | Posted: 6/24/08
Sticking the rubber vacuum plugs on both ends of the lines helps keep them clean as you install them...

DSCF0253.JPG
673 hits | 78.2 KB | Posted: 6/24/08
Then just stick them in and readjust the bends as you go. It really isn't very difficult, just dirty...

DSCF0239.JPG
812 hits | 74.96 KB | Posted: 6/24/08
Here's a shot of the front passenger's side fuel and vapour lines clamped down by the clips and 10 m...

DSCF0256.JPG
704 hits | 61.39 KB | Posted: 6/24/08
Don't be a-fearin' the dreaded "plastic crimped from the factory onto steel lines".

DSCF0257.JPG
635 hits | 67.19 KB | Posted: 6/24/08
Just slice down the side of the plastic line and free the perfectly re-usable barbed fitting. Slide ...

DSCF0229.JPG
749 hits | 78.9 KB | Posted: 6/24/08
A couple of nearly perfect 90 degree bends secured tight to the frame rail by the factory clamp and ...

DSCF0271.JPG
686 hits | 69.41 KB | Posted: 6/24/08
Dunno how I lived without these ratchet wrenches. Got a set of 28, on sale last week, and I'm loving...

DSCF0268.JPG
676 hits | 54.87 KB | Posted: 6/24/08
Some of the old lines piled up ready for the trash.