P1050071.JPG 6976 hits | 76.07 KB | Posted: 2/21/05 Photo of the fume shroud cut off inside the collector
PA150088.JPG 6516 hits | 39.33 KB | Posted: 2/21/05 You can see the 90 degree CCV elbow connected to a 3/4" ID plastic coupler with two screw clamps goi...
P1050072.JPG 5631 hits | 73.35 KB | Posted: 2/21/05 A shot of the coolant hose with the screw clamp heading down along the fender
P1050076.JPG 5398 hits | 67.44 KB | Posted: 2/21/05 A shot of the 3/4" coolant hose ending just a couple inches past the tranny crossmember/support
P1050077.JPG 5124 hits | 72.78 KB | Posted: 2/21/05 Just a shot of the coolant hose going down along the fender from the CCV cover
Intake tube.jpg 5612 hits | 56.82 KB | Posted: 2/21/05 Just a peek at the compressor wheel with the fume collector removed
Exhaust sleeve.jpg 6313 hits | 40.88 KB | Posted: 2/21/05 4" piece of aluminized exhaust pipe used for deleting the stock fume collector(Photo courtesy of TXT...
PVC sleeve.jpg 5974 hits | 36.58 KB | Posted: 2/21/05 4" piece of PVC pipe in place of the stock fume collector unit(Photo author unknown)
175161543sDmewU_ph.jpg 6764 hits | 47.47 KB | Posted: 3/16/05 A fine example of an intercooler removed before CCV mod,yuck!!!
Imagine what that oil coating does ...
PB200028.JPG 2979 hits | 53.34 KB | Posted: 3/23/05 Intercooler cleaned up and ready to be re-installed
PB200029.JPG 2853 hits | 57.21 KB | Posted: 3/23/05 Right side charge tube cleaned up and ready to be re-installed
CCV Modifications
