IMG_0376.JPG 798 hits | 50.71 KB | Posted: 1/16/08 Drill out four holes to ease access for your jigsaw. The MDF is 10 1/4" square and starts out as 3/4...
IMG_0379.JPG 768 hits | 76.11 KB | Posted: 1/16/08 Jigsaw the hole out a 1/4" bigger than the 8" midrange component speaker.
IMG_0380.JPG 749 hits | 56.22 KB | Posted: 1/16/08 Check the speakers have plenty of clearance in the covers holes.
IMG_0387.JPG 767 hits | 54.58 KB | Posted: 1/16/08 Set the table saw at the blade's width to shave off the majority of the covers backside material.
IMG_0389.JPG 737 hits | 59.24 KB | Posted: 1/16/08 The material left will space the covers to clear the vinyl walls in the Bronco.
img_0046.jpg 856 hits | 48.71 KB | Posted: 1/16/08 It's important to get the cover flush with the MDF when using these speaker cover retaining sockets ...
IMG_0390.JPG 884 hits | 54.27 KB | Posted: 1/16/08 A quick run around the outside of the covers with a router and the cloth material should have no pro...