DSCN4977.JPG
567 hits | 69.67 KB | Posted: 4/12/06
It will take a lot to make this thing look good again!

DSCN4978.JPG
565 hits | 72.37 KB | Posted: 4/12/06

DSCN4979.JPG
582 hits | 82.07 KB | Posted: 4/12/06
Brake calipers off

DSCN4980.JPG
545 hits | 92.14 KB | Posted: 4/12/06

DSCN4981.JPG
523 hits | 77.58 KB | Posted: 4/12/06
Factory hubs are pretty beefy

DSCN4982.JPG
534 hits | 114.22 KB | Posted: 4/12/06

DSCN4983.JPG
498 hits | 70.73 KB | Posted: 4/12/06

DSCN4984.JPG
571 hits | 70.42 KB | Posted: 4/12/06
No more rotors, hubs, spindles and brake lines

DSCN4985.JPG
558 hits | 84.17 KB | Posted: 4/12/06
Outer knuckles and axle shafts gone

DSCN4986.JPG
541 hits | 74.61 KB | Posted: 4/12/06
All this stuff is covering up my work bench

DSCN4987.JPG
571 hits | 127.88 KB | Posted: 4/12/06
Notice the marks aligning the bearing caps

DSCN4991.JPG
496 hits | 94.48 KB | Posted: 4/12/06
Stock 3.55 gears and open carrier

DSCN4992.JPG
524 hits | 97.07 KB | Posted: 4/12/06

DSCN4993.JPG
516 hits | 95.48 KB | Posted: 4/12/06

DSCN4994.JPG
523 hits | 106.51 KB | Posted: 4/12/06

DSCN4995.JPG
563 hits | 97.99 KB | Posted: 4/12/06

DSCN4996.JPG
563 hits | 74.34 KB | Posted: 4/12/06
It took degreaser, a pressure washer and hours with a wire wheel to clean it up

DSCN4997.JPG
542 hits | 74.15 KB | Posted: 4/12/06

DSCN4998.JPG
546 hits | 70.3 KB | Posted: 4/12/06
Painted up

DSCN4999.JPG
512 hits | 90.39 KB | Posted: 4/12/06
Pressing the old ball joints out

DSCN5000.JPG
526 hits | 92.76 KB | Posted: 4/12/06

DSCN5002.JPG
541 hits | 94.16 KB | Posted: 4/12/06

DSCN5003.JPG
562 hits | 102.28 KB | Posted: 4/12/06
Home made custom bearing puller

DSCN5004.JPG
560 hits | 58.11 KB | Posted: 4/12/06
This is the bulkhead fitting for the air line to the ARB locker

DSCN5005.JPG
531 hits | 99.02 KB | Posted: 4/12/06
Installing the ARB and 4.56 gears out of my old TTB

DSCN5006.JPG
521 hits | 72.7 KB | Posted: 4/12/06
Good to go!