Air Bag at 35 PSI.JPG 1346 hits | 69.17 KB | Posted: 3/22/05 (Posted in: Air Bags and Tank)
Air Lines to Bags.JPG 1217 hits | 58.42 KB | Posted: 3/22/05 (Posted in: Air Bags and Tank)
Bottom of Bag with Studs for Keeper Bar.JPG 1475 hits | 73.51 KB | Posted: 3/22/05 The studs were added so that a keeper bar could be used in place of the tab on the AIRLIFT lower bracket that was remove to provide room for the lower air line. (Posted in: Air Bags and Tank)
Durring Phase One.JPG 1432 hits | 63.49 KB | Posted: 3/22/05 My Work Space (Posted in: Air Bags and Tank)
Air Fittings.JPG 1325 hits | 57.94 KB | Posted: 3/22/05 Close up of Fittings (Posted in: Air Bags and Tank)
Left side Tank Now Removed.JPG 1686 hits | 59.28 KB | Posted: 3/22/05 I started with a tank like this on each side but just did not like it. (Posted in: Air Bags and Tank)
Tank Mounting Stud.jpg 1377 hits | 39.08 KB | Posted: 3/22/05 This is the single stud that mounts the tank, an access hole was drilled to allow you to get the upper nut and washer in place (Posted in: Air Bags and Tank)
Tank Strap.JPG 1317 hits | 62.69 KB | Posted: 3/22/05 (Posted in: Air Bags and Tank)
Top of Bag with New 14 port.JPG 1433 hits | 67.46 KB | Posted: 3/22/05 Top of bag with added 1/4" port all fittings for bags use 3/8 OD Polly line (Posted in: Air Bags and Tank)
Keyed Strap End.jpg 1299 hits | 83.92 KB | Posted: 3/22/05 (Posted in: Air Bags and Tank)
Mounted tank.JPG 1400 hits | 77.5 KB | Posted: 3/22/05 (Posted in: Air Bags and Tank)
Front Quarter.jpg 1363 hits | 88.56 KB | Posted: 4/20/05 View of front after adding V code springs in Early 2002 (Posted in: Front End Upgrade. Done in Jan. of 02)
Front Height.jpg 1349 hits | 97.17 KB | Posted: 4/20/05 Front Height (Posted in: Front End Upgrade. Done in Jan. of 02)
Front Height Close up.jpg 1205 hits | 62.2 KB | Posted: 4/20/05 Front Height Dim. (Posted in: Front End Upgrade. Done in Jan. of 02)
Front Travel W-Rev Bump Stop.jpg 1651 hits | 91.58 KB | Posted: 4/20/05 Front End Close up with new parts early 2002 (Posted in: Front End Upgrade. Done in Jan. of 02)
DSC01832.JPG 3176 hits | 51.47 KB | Posted: 6/19/07 At last wired up the inverter the way I wanted to, It has three power feeds the left and right power points and the main feed from the relay when the truck is running. (Posted in: 05 Excursion)