000_0059z.jpg 634 hits | 92.04 KB | Posted: 3/4/06 Now tighted the bottom nut to 60 lb. Use a 18 mm socket with a ratched. Then use a Torque wrench to tighted to 60 pounds. (Posted in: Front 2wd Ranchos 9000X Shocks)
000_0060z.jpg 651 hits | 100.75 KB | Posted: 3/4/06 The Install the bushing, ring and nut. use a deep socket 19 mm with a ratched. (Posted in: Front 2wd Ranchos 9000X Shocks)
000_0061z.jpg 671 hits | 92.83 KB | Posted: 3/4/06 use a 3/4th Open Box/End wrench to hold the shock stroker from turning (Posted in: Front 2wd Ranchos 9000X Shocks)
000_0062z.jpg 674 hits | 98.97 KB | Posted: 3/4/06 Let the Open Box/End Wrench slide into the coil spring so it will have something to hold on too. (Posted in: Front 2wd Ranchos 9000X Shocks)
000_0063z.jpg 647 hits | 121.24 KB | Posted: 3/4/06 Use some extension so you have enough room for the torque wrench. Torque it to 30 pounds. (Posted in: Front 2wd Ranchos 9000X Shocks)
000_0064twopizz.jpg 617 hits | 94.81 KB | Posted: 3/4/06 The right is the same for removal and installing. But its a little more difficult. Its harder to get any tools in there. Even with a crazy head socket.. I latter found this intresting opening on the right side looks a little wider. (Posted in: Front 2wd Ranchos 9000X Shocks)
000_0073z.jpg 667 hits | 92.38 KB | Posted: 3/4/06 So I sliped in a Open Box/End wrench 19 mm and use a open end wrench or 3/4th to hold the shock stroker from turning. Since I couldn't torque it properly I cound the left side threads and it came out 9 threads count. So I threaded the bolt to 9 or s... (Posted in: Front 2wd Ranchos 9000X Shocks)
000_0074z.jpg 761 hits | 114.23 KB | Posted: 3/4/06 here is another shot of how I did it. (Posted in: Front 2wd Ranchos 9000X Shocks)
000_0076z.jpg 800 hits | 100.22 KB | Posted: 3/4/06 Now you are ready to hit the road. And I tell you what.... WOW what a differance. I can't wait till my rears get here. Check every so often for tightness since grease has gotten on the threads. (Posted in: Front 2wd Ranchos 9000X Shocks)
100_0460.jpg 694 hits | 101.88 KB | Posted: 3/11/06 WOW (Posted in: My Excursion with Aaron's Excursion)
100_0465.jpg 687 hits | 80.48 KB | Posted: 3/11/06 Nice (Posted in: My Excursion with Aaron's Excursion)
100_0466.jpg 768 hits | 85.94 KB | Posted: 3/11/06 Mine is on the left and Aarons is on the right... (Posted in: My Excursion with Aaron's Excursion)
!cid_03-23-06_1750.jpg 780 hits | 3.48 KB | Posted: 3/25/06 Aarons Excursion been hit at his job... A trailer was backing up and backup too far. Ran over the fence and into his truck in the parking lot.... (Posted in: My Excursion with Aaron's Excursion)
000_0266zz.jpg 782 hits | 90.71 KB | Posted: 5/1/06 I removed the inside hatchback trim to access the harness. The trim is simply snap on and off. (Posted in: Ford Lightning 3rd Brake light)
000_0268zz.jpg 782 hits | 60.12 KB | Posted: 5/1/06 Behind the break light needs are 2 little studs that needs a little trim or shaving. You will see what needs to be trimed off... But wait a minute.... (Posted in: Ford Lightning 3rd Brake light)
000_0269zz.jpg 850 hits | 73.19 KB | Posted: 5/1/06 there are gaps all over this thing... (Posted in: Ford Lightning 3rd Brake light)
000_0270zz.jpg 1004 hits | 78.66 KB | Posted: 5/1/06 Not a perfect fit. Did I get the right one? (Posted in: Ford Lightning 3rd Brake light)
000_0272zz.jpg 858 hits | 68.98 KB | Posted: 5/1/06 Installed but its kinda noticeable (Posted in: Ford Lightning 3rd Brake light)
000_0290zz.jpg 792 hits | 71.49 KB | Posted: 5/1/06 What can be done? (Posted in: Ford Lightning 3rd Brake light)
000_0291zz.jpg 838 hits | 67.97 KB | Posted: 5/1/06 It lookes ok (Posted in: Ford Lightning 3rd Brake light)
000_0412z.jpg 799 hits | 56.92 KB | Posted: 8/13/06 I had my roof racks off since the begining of 06, I was digging through some old stuff and I found my roof racks. I just wanted to show you the rubbing markings left under the racks. (Posted in: Roof Racks markings)
000_0415z.jpg 735 hits | 65.67 KB | Posted: 8/13/06 See the white markings. this is where the roof racks were touching the roof of the Excursion (Posted in: Roof Racks markings)
000_0416z.jpg 825 hits | 70.13 KB | Posted: 8/13/06 This is why alot of Excursion owners remove their roof racks. And to let new Excursion owners about the racks rubbing the roof. (Posted in: Roof Racks markings)
000_0417z.jpg 799 hits | 64.84 KB | Posted: 8/13/06 The roof racks did have a rubber pad under the roof racks but as you can see, it was collecting dust and that dust can scratch the roof of the Excursions. (Posted in: Roof Racks markings)
000_0418z.jpg 827 hits | 69.41 KB | Posted: 8/13/06 What was ford thinking... But hey, my Excursion looks alot smoother now (Posted in: Roof Racks markings)
000_0422zz.jpg 2467 hits | 98.75 KB | Posted: 8/22/06 The Ford recall 05S28 was for a fuselink update the cruise control harness. (Posted in: Ford Recall number 05S28)
000_0426zz.jpg 1567 hits | 101.26 KB | Posted: 8/22/06 Another look of the harness. (Posted in: Ford Recall number 05S28)
45_3.jpg 933 hits | 50.79 KB | Posted: 10/9/06 What is this world coming too. (Posted in: Side vents?)
d6_3.jpg 915 hits | 56.12 KB | Posted: 10/9/06 Not my style (Posted in: Side vents?)
000_0440z.jpg 755 hits | 101.98 KB | Posted: 10/14/06 Upgrade to the best Sliverstar headlamps blub and foglamp bulb (Posted in: Sliverstars headlamp and fog)
100_0270z.jpg 829 hits | 90.37 KB | Posted: 2/4/07 Hey Look what I found! a 2008 F450! Dually crew cab (Posted in: New F450 dully!)
