2001 Ford Excursion Winch Bumper pictures, videos, and sounds


Hits: 1451 Size: 71.12 KB Posted: 12/2/03 Relocating power steering cooler to make room for winch.	Hits: 1641 Size: 69.69 KB Posted: 12/2/03 Winch cradle mounts in tow hook holes. Bumper hangs on winch mount.	Hits: 1454 Size: 73.56 KB Posted: 12/2/03 I had to tilt winch tray forward to put in M15000 winch. After mounting my HS9500, I realized the c...	Hits: 1213 Size: 92.21 KB Posted: 12/2/03 Wiring up controller...	Hits: 1391 Size: 69.85 KB Posted: 12/2/03 Must connect controller ground to motor ground terminal. As you can see everything is very tight wi...
Hits: 2489 Size: 88.16 KB Posted: 12/2/03 Winch tray is completely assembled with winch completed and operational. I had to undo the tow hook...	Hits: 3680 Size: 83.88 KB Posted: 12/2/03 Bumper side view, notice blocker beam behind and below bumper. I think I am going to take it off.	Hits: 1712 Size: 90.78 KB Posted: 12/2/03 Bumper mounted in final location, I just needed to add fog lights that I wired into factory harness ...	Hits: 1429 Size: 108.45 KB Posted: 12/2/03 Using new bumper as a bump stop while clearing a road in Julian, CA after the fires.	Hits: 1693 Size: 112.05 KB Posted: 12/2/03 Another angle...
Hits: 2480 Size: 53.41 KB Posted: 4/17/04 Bumper finished with fog lights installed...