DSC00893.JPG
449 hits | 49.3 KB | Posted: 3/9/07
i been working on the EEC and wire harness placement. I going to try and be as close the the stock 1...

DSC00894.JPG
489 hits | 55.5 KB | Posted: 3/9/07
another before view

DSC00895.JPG
474 hits | 48.58 KB | Posted: 3/9/07
this is the space the EEC should fit in.

DSC00896.JPG
492 hits | 61.3 KB | Posted: 3/9/07
this is where the new harness will come thru (I hope). the wire harness on the bottom was for the Hi...

DSC00897.JPG
472 hits | 60.05 KB | Posted: 3/9/07
this is the end of the high alt harness.

DSC00898.JPG
529 hits | 47.58 KB | Posted: 3/9/07
this is the motor side of the firewall where the EEC and harness will go. you can see the high alt h...

DSC00899.JPG
508 hits | 68.94 KB | Posted: 3/9/07
the 2 rusty nuts are the ebrake mount to the right of this is where the EEC will go.

DSC00900.JPG
446 hits | 53.55 KB | Posted: 3/9/07
this is the speedo cable and firewall shot

DSC00901.JPG
469 hits | 54.4 KB | Posted: 3/9/07
here is another view of the harness and EEC before shot.

wireharness as it started.JPG
563 hits | 56.56 KB | Posted: 3/12/07
here is one last look at the fire wall bafor any work was done.

computerinside.JPG
467 hits | 57.55 KB | Posted: 3/12/07
here is the inside where the computer and harness connectors will go.

computer2.JPG
541 hits | 36.75 KB | Posted: 3/12/07
here is the EEC pocket. there is a seam running at an angle in the back of the pocket but that will ...

computer harness.JPG
550 hits | 60.32 KB | Posted: 3/12/07
this is the EEC mount i made a template to get the correct spacing and hole size.

leaves.JPG
498 hits | 56.72 KB | Posted: 3/12/07
this was one reason i changed the front cowl as it allows alot of leaves and dirt in the cowls and r...

leaves2.JPG
451 hits | 57.29 KB | Posted: 3/12/07
i vaccumed out the leaves and dirt. thius should not be an issue any more. you can see the junk.

computer.JPG
546 hits | 60.26 KB | Posted: 3/12/07
after some measuring and carefull cutting i got the computer mount and computer installed. it looks ...

computer3.JPG
546 hits | 52.01 KB | Posted: 3/12/07
here is under the hood with the gasket in place. i covered the connection point to keep out dirt. lo...