DSC00902.JPG
507 hits | 52.21 KB | Posted: 3/9/07
this is the stock p/s pump

DSC00903.JPG
535 hits | 46.27 KB | Posted: 3/9/07
here is the side shot of the stock pump.

sagnaw swap.JPG
614 hits | 59.68 KB | Posted: 3/12/07
after removing the pulley and the 3 bolts the P/S pump came right off.

sagnaw swap2.JPG
538 hits | 74.68 KB | Posted: 3/12/07
here is the front of the bracket withthe P/s removed. it looks like i have to get a different bracke...

sagniawnew4.JPG
615 hits | 57.14 KB | Posted: 3/16/07
as i was removing the AC compressor from the old mount i found they used a couple spacers. i found o...

sagniawnew5.JPG
580 hits | 50.57 KB | Posted: 3/16/07
here is the bottom spacer.

sagniawnew6.JPG
568 hits | 64.43 KB | Posted: 3/16/07
here is the old mount there is 2 bolts on the top and two bolts and two nuts on the bottom

sagniawnew7.JPG
612 hits | 70.37 KB | Posted: 3/16/07
here is the motor with the bracket removed. i need to clean the motor some more..

sagniawnew8.JPG
532 hits | 78.81 KB | Posted: 3/16/07
Here is the front of the motor no bracket.

sagniawnew15.JPG
630 hits | 64.58 KB | Posted: 3/16/07
here is the old mount off of the motor.

sagniawnew.JPG
564 hits | 59.82 KB | Posted: 3/16/07
well i went to 6 different junk yards and found only one van with a 4.9 the rest had V-8s. i got the...

sagniawnew2.JPG
608 hits | 55.52 KB | Posted: 3/16/07
here is the new pump it is an oilly mess right now.

sagniawnew3.JPG
608 hits | 59.61 KB | Posted: 3/16/07
here is the other side of the new pump.

sagniawnew8.JPG
576 hits | 78.81 KB | Posted: 3/16/07
i washed the motor down again and here is a shot before the new mbrackets goes on.

sagniawnew9.JPG
609 hits | 73.19 KB | Posted: 3/16/07
the new mount is in place and the old AC compressor and spacers are installed.

sagniawnew10.JPG
521 hits | 67.42 KB | Posted: 3/16/07
here is a side view of the new mount and AC compressor installed.

sagniawnew11.JPG
560 hits | 70.48 KB | Posted: 3/16/07
here is the new P/S pump in place. this stuff cleaned up real good.

sagniawnew12.JPG
510 hits | 60.58 KB | Posted: 3/16/07
a side view of the new pump installed.

sagniawnew13.JPG
657 hits | 72.85 KB | Posted: 3/16/07
i then installed the serp belt pulley.

sagniawnew14.JPG
692 hits | 72.86 KB | Posted: 3/16/07
I then removed the old hose ends and all that is needed is a new pressure hose for E150 van and a n...

motor ready.JPG
629 hits | 75.16 KB | Posted: 3/20/07
the motor is now ready to go in the bronco. the 3G is the smaller one for now. the P/S pump swap is ...

signaw swap.JPG
536 hits | 44.46 KB | Posted: 7/3/07
ok next step i went to NAPA and got the return line Part number 7-1899 and the pressure line (from a...

signaw swap2.JPG
482 hits | 51.99 KB | Posted: 7/3/07
Here are the parts out of the box and ready to go on Jezebel