100_0344.JPG
615 hits | 68.12 KB | Posted: 2/7/10
We've ground off all the paint and bondo, so we can properly fix the dent; there was about 3/8" of bondo on this panel, for no reason.
(Posted in: Re-paint)

100_0346.JPG
694 hits | 63.1 KB | Posted: 2/7/10
that's bondo, oozing through holes in the panel!
(Posted in: Re-paint)

100_0352.JPG
704 hits | 65.39 KB | Posted: 2/7/10
We used a dent puller to straighten out the tailgate, and then welded up the holes.
(Posted in: Re-paint)

100_0366.JPG
606 hits | 64.05 KB | Posted: 2/7/10
there is three coats of paint on the back half of the car, and four on the front half; it was red originally, then a loud orange and then the current orange.

the front half of the car had a coat of clear on it, but the back half was only single st...
(Posted in: Re-paint)

100_0379.JPG
649 hits | 56.75 KB | Posted: 2/9/10
we layed on two coats of primer on the hood, then blocked-sanded it.
(Posted in: Re-paint)

100_0387.JPG
677 hits | 57.62 KB | Posted: 2/9/10
Day 4: I sanded off two coats of paint off the roof, down to the second coat of paint, which was bright orange.
(Posted in: Re-paint)

100_0388.JPG
640 hits | 48.11 KB | Posted: 2/9/10
the car was originally 2B "bright red", then it was painted orange, then repainted the current orange; most of the fenders, half of the doors and half the roof had a clear coat on them as well.
(Posted in: Re-paint)

100_0389.JPG
681 hits | 54.66 KB | Posted: 2/9/10
Day 5: the first round of block sanding is complete, I removed at least two layers of paint with a long-board by hand;
then we layed down two coats of sealer, since the new paint seems to react negatively with the old paint.
(Posted in: Re-paint)

100_0393.JPG
730 hits | 56.79 KB | Posted: 2/9/10
Kim is laying on the first coat of Omni MH283 hi-build primer; he'll put on two coats, most of which we will sand off.
(Posted in: Re-paint)

100_0394.JPG
833 hits | 47.71 KB | Posted: 2/9/10
the flames are coming! these are just primer
(Posted in: Re-paint)

100_0396.JPG
676 hits | 61.54 KB | Posted: 2/9/10
Day 6: more hi-build primer...
(Posted in: Re-paint)

100_0396.JPG
667 hits | 61.54 KB | Posted: 2/9/10
(Posted in: Re-paint)

100_0402.JPG
749 hits | 59.81 KB | Posted: 2/14/10
Day 7: three coats of high-build grey primer, which got block-sanded, then three more coats, which also got blocked sanded....
(Posted in: Re-paint)

100_0414.JPG
803 hits | 57.33 KB | Posted: 2/14/10
followed by a coat of white Omni MR170 epoxy sealer just before the color base coat
(Posted in: Re-paint)

100_0422.JPG
804 hits | 64.33 KB | Posted: 2/14/10
Day 8: then two coats of Omni MBC "Prophet Orange 61067" base coat (which is actually a Ford color.)
(Posted in: Re-paint)

100_0437.JPG
750 hits | 64.81 KB | Posted: 2/14/10
then we layed out the flames with 1/8" fine line tape.
(Posted in: Re-paint)

100_0439.JPG
670 hits | 67.2 KB | Posted: 2/14/10
and masked off the flames, then we sprayed on a little Omni M175 Gold Pearl in DBC500 binder.
(Posted in: Re-paint)

100_0442.JPG
757 hits | 54 KB | Posted: 2/14/10
then we finished it off with three coats of ShopLine 620 clear
(Posted in: Re-paint)

100_0444.JPG
703 hits | 51.84 KB | Posted: 2/14/10
the "ghost-flames" are only visible from certain angles, and under direct light. you can barely see them here on the fender.
(Posted in: Re-paint)

100_0445.JPG
718 hits | 53.78 KB | Posted: 2/14/10
(Posted in: Re-paint)

100_0446.JPG
596 hits | 56.51 KB | Posted: 2/14/10
the flames fade towards the front of the car.
(Posted in: Re-paint)

100_0447.JPG
635 hits | 58.38 KB | Posted: 2/14/10
(Posted in: Re-paint)

100_0448.JPG
643 hits | 54.17 KB | Posted: 2/14/10
(Posted in: Re-paint)

100_0449.JPG
664 hits | 54.93 KB | Posted: 2/14/10
(Posted in: Re-paint)

100_0450.JPG
679 hits | 54.18 KB | Posted: 2/14/10
(Posted in: Re-paint)

100_0419.JPG
672 hits | 65.81 KB | Posted: 2/14/10
this is the base coat; Omni AU MBC "prohet orange 61067"
(Posted in: Re-paint)

100_0454.JPG
660 hits | 61.58 KB | Posted: 2/14/10
(Posted in: Re-paint)

100_0458.JPG
607 hits | 65.81 KB | Posted: 2/14/10
the drivers door, post repairs.
(Posted in: Re-paint)

100_0461.JPG
745 hits | 52.87 KB | Posted: 2/14/10
passenger door, post repair.
(Posted in: Re-paint)

100_0466.JPG
593 hits | 57.18 KB | Posted: 2/14/10
(Posted in: Re-paint)

100_0469.JPG
731 hits | 81.56 KB | Posted: 2/15/10
finally got the car outside this morning; it looks even better
(Posted in: Re-paint)

100_0470.JPG
698 hits | 76.21 KB | Posted: 2/15/10
(Posted in: Re-paint)

100_0472.JPG
730 hits | 71.82 KB | Posted: 2/15/10
(Posted in: Re-paint)

100_0473.JPG
708 hits | 64.66 KB | Posted: 2/15/10
there is a little run in the clear off the corner of this marker lite. we'll just block it off and polish it and it will be perfect
(Posted in: Re-paint)

100_0474.JPG
618 hits | 43.91 KB | Posted: 2/15/10
I got a big sag in the clear on this body line above the rear fenderwell; we'll block sand it off and polish the area and it will be fine.
(Posted in: Re-paint)

100_0475.JPG
802 hits | 67.68 KB | Posted: 2/15/10
the "ghost-flames" turned out great, but they are really hard to get a photo of
(Posted in: Re-paint)

100_0476.JPG
656 hits | 83.93 KB | Posted: 2/15/10
(Posted in: Re-paint)

100_0478.JPG
652 hits | 87.91 KB | Posted: 2/15/10
re-assembly has started...
(Posted in: Re-paint)

100_0477.JPG
633 hits | 76.11 KB | Posted: 2/15/10
my gas cap turned out great! it was so ugly before--it only had paint on the upper half, the bottom was purple.
(Posted in: Re-paint)

100_0480.JPG
679 hits | 89.22 KB | Posted: 2/18/10
(Posted in: Re-paint)

100_0483.JPG
714 hits | 90.91 KB | Posted: 2/18/10
(Posted in: Re-paint)

100_0486.JPG
680 hits | 93.9 KB | Posted: 2/18/10
(Posted in: Re-paint)

100_0487.JPG
643 hits | 94.45 KB | Posted: 2/18/10
(Posted in: Re-paint)

100_0484.JPG
760 hits | 68.82 KB | Posted: 2/18/10
(Posted in: Re-paint)

100_0479.JPG
736 hits | 102.25 KB | Posted: 2/18/10
(Posted in: Re-paint)