rt wheel well after cleanup.jpg
411 hits | 97.88 KB | Posted: 8/5/07
after some clean up
(Posted in: Project Ranchero stage 2)

right side after cleaning.jpg
426 hits | 85.82 KB | Posted: 8/5/07
rt side after cleaning
(Posted in: Project Ranchero stage 2)

lt side after cleaning.jpg
402 hits | 85.3 KB | Posted: 8/5/07
after cleaning and rust ecapsulated
(Posted in: Project Ranchero stage 2)

100_1390_edited.jpg
439 hits | 91.91 KB | Posted: 8/6/07
inside of drivers door

(Posted in: Project Ranchero stage 2)

100_1417.jpg
440 hits | 78.38 KB | Posted: 8/8/07
windshield and rear glass out and hood off, what a pain getting all the wetherstrip adhiesive off...
(Posted in: Project Ranchero stage 2)

100_1429.jpg
414 hits | 106.53 KB | Posted: 8/8/07
hood had alot of oil soaked into it and some surface rust - another pain to clean...
(Posted in: Project Ranchero stage 2)

100_1423.jpg
497 hits | 89.3 KB | Posted: 8/8/07
carpet and seat out - where the heck em I going to put all these parts??????
(Posted in: Project Ranchero stage 2)

100_1428.jpg
563 hits | 89.42 KB | Posted: 8/8/07
just alittle surface rust on this side from the heater core that leaked for like 6 monthes when I first got this Ranchero in 2002
(Posted in: Project Ranchero stage 2)

100_1432.jpg
413 hits | 71.56 KB | Posted: 8/8/07
ok i found a place for the seat (temporarily).. all i did was make a box for it to sit in so the bolts dont tear up the house carpet of kids
(Posted in: Project Ranchero stage 2)

100_1445_edited.jpg
401 hits | 95.16 KB | Posted: 8/8/07
How come Shifty makes it look so easy like it was done in a week....... I am telling you my fingers hurt from getting all the weatherstip adhisives and seam sealers off this veh so it does not contaminate the whole paint job later on down the road......
(Posted in: Project Ranchero stage 2)

100_1441_edited.jpg
354 hits | 90.98 KB | Posted: 8/8/07
Right side
Look at the color - thats the color I want, now when i look at the paint code "Z" thats for Sauterine gold, and I see that color on the exterior but not the door jambs or interior.... can someone tell me what the color code and name this...
(Posted in: Project Ranchero stage 2)

100_1448.jpg
392 hits | 82.47 KB | Posted: 8/8/07
right door before any work performed to it
(Posted in: Project Ranchero stage 2)

100_1454.jpg
536 hits | 91.94 KB | Posted: 8/9/07
the worst of the right floor pan is not really bad at all its mostly what ever they used to seal the bottom - appears to be undercoating and some surface rust and pitting still very very solid
(Posted in: Project Ranchero stage 2)

100_1458.jpg
516 hits | 88.85 KB | Posted: 8/9/07
I was thinking this area would have been trashed since that is where the spare tire goes its right under the bed and there is some rust through in the bed leading to this compartment... not bad
(Posted in: Project Ranchero stage 2)

100_1462_edited.jpg
420 hits | 90.34 KB | Posted: 8/9/07
pass side at windshield and A-pillar is the worst of the room - again its only surface and some pitting.... no prob (yeah right - this whole thing has been clean this, clean that - it just does not end does it?
(Posted in: Project Ranchero stage 2)

100_1466_edited.jpg
498 hits | 113.73 KB | Posted: 8/9/07
right side hings - wore out, have rebuild kits for both sides, except the left lower hinge is broke in half - my fault i hit it too hard driving the pin out
(Posted in: Project Ranchero stage 2)

100_1456_edited.jpg
397 hits | 100.55 KB | Posted: 8/9/07
when my step son dragged the car along the house one day I used some cheap bondo to fill it, this is the area where i had to beat the dent out - now i get to dig all that old bondo out and now that i have the room and i am in there anyway - i will re...
(Posted in: Project Ranchero stage 2)

100_1481_edited.jpg
479 hits | 93.07 KB | Posted: 8/10/07
rollled outside to hose off rust inhibitor from floor boards
(Posted in: Project Ranchero stage 2)

100_1474_edited.jpg
441 hits | 83.43 KB | Posted: 8/10/07
pass side floor after washing out surface rust
(Posted in: Project Ranchero stage 2)

100_1472_edited.jpg
434 hits | 99.24 KB | Posted: 8/10/07
drivers side floor
(Posted in: Project Ranchero stage 2)

100_1790_edited.jpg
410 hits | 108.16 KB | Posted: 8/30/07
por-15
(Posted in: Project Ranchero stage 2)

100_1788_edited.jpg
434 hits | 92.13 KB | Posted: 8/30/07
por-15
(Posted in: Project Ranchero stage 2)

100_1831.jpg
436 hits | 83.73 KB | Posted: 9/9/07
(Posted in: Project Ranchero stage 2)

100_1835_edited.jpg
437 hits | 95.39 KB | Posted: 9/9/07
hinges rebuilt, and seams sealed, ready for primer

(Posted in: Project Ranchero stage 2)

100_1841_edited.jpg
426 hits | 77.71 KB | Posted: 9/9/07
my first Mig weld job, or any weld in that fact. not a whole lot ot penetration but it is cleaning up nice and will hold
(Posted in: Project Ranchero stage 2)

100_1846_edited.jpg
446 hits | 99.55 KB | Posted: 9/9/07
$125 bucks at Harbor Freight, I tossed the wire that it came with wich was 030 and bought some Lincoln 025 - works much nicer now
(Posted in: Project Ranchero stage 2)

100_1845_edited.jpg
497 hits | 89.56 KB | Posted: 9/9/07
well this is my first paint job and prep.. there is just so much cleaning to do, but its ready to shoot primer in the jambs and cowl and interior
(Posted in: Project Ranchero stage 2)

100_1844_edited.jpg
462 hits | 82.84 KB | Posted: 9/9/07
it did have a back board that is kinda rough, maybe I will just leave it off if this turns out goood
(Posted in: Project Ranchero stage 2)

100_1843_edited.jpg
459 hits | 119.04 KB | Posted: 9/9/07
well there is the primer.... Now what do I do?
(Posted in: Project Ranchero stage 2)

100_1874_edited.jpg
487 hits | 84.23 KB | Posted: 9/28/07
sanding
(Posted in: Project Ranchero stage 2)

100_1877_edited.jpg
535 hits | 96.21 KB | Posted: 9/28/07
(Posted in: Project Ranchero stage 2)

100_1875_edited.jpg
432 hits | 77.08 KB | Posted: 9/28/07
welded up trim holes
(Posted in: Project Ranchero stage 2)

100_1876_edited.jpg
445 hits | 78.23 KB | Posted: 9/28/07
more trim holes welded and grinded flat

(Posted in: Project Ranchero stage 2)

100_1881_edited.jpg
481 hits | 76.48 KB | Posted: 9/28/07
shot primer in the interior and all the jambs
(Posted in: Project Ranchero stage 2)

100_1889.jpg
442 hits | 64.76 KB | Posted: 9/28/07
drivers door ready for filler
(Posted in: Project Ranchero stage 2)

100_1891.jpg
435 hits | 72.42 KB | Posted: 9/28/07
1/4 panal in progress
(Posted in: Project Ranchero stage 2)

100_1888.jpg
408 hits | 69.92 KB | Posted: 10/1/07
(Posted in: Project Ranchero stage 2)

100_1894.jpg
456 hits | 84.63 KB | Posted: 10/1/07
(Posted in: Project Ranchero stage 2)

100_1899_edited.jpg
426 hits | 75.11 KB | Posted: 10/1/07
(Posted in: Project Ranchero stage 2)

100_1902_edited.jpg
475 hits | 93.21 KB | Posted: 10/1/07
(Posted in: Project Ranchero stage 2)

100_1943.jpg
525 hits | 89.71 KB | Posted: 10/3/07
after using an entire 20 oz can of Rage working on this fender and just sanding it all off - i came to the conclusion that body men are sculpters and way under paid for what they do
(Posted in: Project Ranchero stage 2)

100_1942.jpg
408 hits | 67.58 KB | Posted: 10/3/07
patch work - took me a whole freakin can to get it right

(Posted in: Project Ranchero stage 2)

100_1946.jpg
470 hits | 61.89 KB | Posted: 10/3/07
finishing up on the door
(Posted in: Project Ranchero stage 2)

100_1947.jpg
439 hits | 87.87 KB | Posted: 10/3/07
door done - ready for clean up and primer
(Posted in: Project Ranchero stage 2)

100_1948_edited.jpg
432 hits | 78.34 KB | Posted: 10/3/07
too nice of day outside to be spending it covered in sanding dust... im done, ready to just ebay this damn thing
(Posted in: Project Ranchero stage 2)