38 pipe progress.jpg
0 hits | 71.9 KB | Posted: 1/29/25
Pipe in progress. Just finished mocking it up.
(Posted in: 2024 Big Turbo)

38 pipe tacked.jpg
0 hits | 52.38 KB | Posted: 1/29/25
Pipe tacked together and test fit. Had to retack it a couple times. Aluminum tacks are not as strong as steel and it turns out they break.
(Posted in: 2024 Big Turbo)

38 finished pipe up.jpg
0 hits | 68.81 KB | Posted: 1/29/25
The finished pipe from above at an angle you can see both sides.
(Posted in: 2024 Big Turbo)

39 lower pipe tacked.jpg
0 hits | 51.23 KB | Posted: 2/1/25
Passenger lower pipe tacked in place
(Posted in: 2024 Big Turbo)

39 lower pipe stick out and start of upper.jpg
0 hits | 84.31 KB | Posted: 2/1/25
Tacked pipe mock up showing the amount of stick up.
(Posted in: 2024 Big Turbo)

39 lower pipe complete.jpg
0 hits | 58.29 KB | Posted: 2/1/25
Final lower pipe.
(Posted in: 2024 Big Turbo)

39 figuring out angles and length of pipe.jpg
0 hits | 78.03 KB | Posted: 2/1/25
Laying out the upper pipe.
(Posted in: 2024 Big Turbo)

39 figuring out angles.jpg
0 hits | 60.19 KB | Posted: 2/1/25
Figuring out the angles to cut
(Posted in: 2024 Big Turbo)

39 laying out pipe.jpg
0 hits | 65.46 KB | Posted: 2/1/25
Cut angles. Measuring for the straight section
(Posted in: 2024 Big Turbo)

39 pipe mock up.jpg
0 hits | 83.71 KB | Posted: 2/1/25
Final mock up.
(Posted in: 2024 Big Turbo)

39 bead rolled.jpg
0 hits | 37.5 KB | Posted: 2/1/25
Rolled bead
(Posted in: 2024 Big Turbo)

39 turning vane layout.jpg
0 hits | 63.61 KB | Posted: 2/1/25
Laying out turning vane.
(Posted in: 2024 Big Turbo)

39 turning vane weld holes.jpg
0 hits | 51.07 KB | Posted: 2/1/25
Drilled holes showing the vane installed on the centerline.
(Posted in: 2024 Big Turbo)

39 turning vane thottle body side.jpg
0 hits | 39.82 KB | Posted: 2/1/25
The throttle body side.
(Posted in: 2024 Big Turbo)

39 turning vane intake side.jpg
0 hits | 51.02 KB | Posted: 2/1/25
The intercooler side
(Posted in: 2024 Big Turbo)

39 final pipe in place.jpg
0 hits | 86.15 KB | Posted: 2/1/25
Final pipe fully welded with fittings.
(Posted in: 2024 Big Turbo)

40 coupler.jpg
0 hits | 74.17 KB | Posted: 2/6/25
45 degree coupler
(Posted in: 2024 Big Turbo)

40 intake.jpg
0 hits | 40.91 KB | Posted: 2/6/25
Air intake inlet.
(Posted in: 2024 Big Turbo)

41 intake pipe line up.jpg
0 hits | 42.58 KB | Posted: 2/12/25
The alignment on the turbo outlet.
(Posted in: 2024 Big Turbo)

41 intake tube.jpg
0 hits | 52.94 KB | Posted: 2/12/25
Turbo intake coupler final trim.
(Posted in: 2024 Big Turbo)

41 intake mock up.jpg
0 hits | 65.66 KB | Posted: 2/12/25
Turbo air intake mock up.
(Posted in: 2024 Big Turbo)

41 intake mock up 2.jpg
0 hits | 67.59 KB | Posted: 2/12/25
Turbo air intake mock up.
(Posted in: 2024 Big Turbo)

42 air intake with filter.jpg
0 hits | 47.99 KB | Posted: 2/21/25
(Posted in: 2024 Big Turbo)

42 air intake.jpg
0 hits | 69.27 KB | Posted: 2/21/25
(Posted in: 2024 Big Turbo)

42 intake weld.jpg
0 hits | 56.15 KB | Posted: 2/21/25
(Posted in: 2024 Big Turbo)

42 spark plug issue.jpg
0 hits | 70.59 KB | Posted: 2/21/25
(Posted in: 2024 Big Turbo)

42 gasket trimmed.jpg
0 hits | 59.26 KB | Posted: 2/21/25
(Posted in: 2024 Big Turbo)

43 area to grind.jpg
0 hits | 80.14 KB | Posted: 2/24/25
(Posted in: 2024 Big Turbo)

43 passenger side.jpg
0 hits | 73.96 KB | Posted: 2/24/25
(Posted in: 2024 Big Turbo)

43 driver side.jpg
0 hits | 49.16 KB | Posted: 2/24/25
(Posted in: 2024 Big Turbo)

43 engine.jpg
0 hits | 76.49 KB | Posted: 2/24/25
(Posted in: 2024 Big Turbo)

51 dipstick.jpg
0 hits | 72.66 KB | Posted: 5/7/25
Dipstick shield to stop oil drip - not effective
(Posted in: 2024 Big Turbo)

51 heat sheild3.jpg
0 hits | 45.63 KB | Posted: 5/7/25
Heat shield
(Posted in: 2024 Big Turbo)

51 heat sheild1.jpg
0 hits | 58.59 KB | Posted: 5/7/25
Heat shield installed
(Posted in: 2024 Big Turbo)

51 heats sheild2.jpg
0 hits | 68.01 KB | Posted: 5/7/25
Heat shield installed

(Posted in: 2024 Big Turbo)

55 new oil feed line.jpg
0 hits | 84.38 KB | Posted: 7/8/25
(Posted in: 2024 Big Turbo)

59 fitting.jpg
0 hits | 44.49 KB | Posted: 8/21/25
(Posted in: 2024 Big Turbo)

59 fitting2.jpg
0 hits | 49.02 KB | Posted: 8/21/25
(Posted in: 2024 Big Turbo)

44 splasdh shield done.jpg
0 hits | 52.61 KB | Posted: 3/1/25
(Posted in: 2024 Big Turbo 2)

44 air intake done.jpg
0 hits | 71.21 KB | Posted: 3/1/25
(Posted in: 2024 Big Turbo 2)

45 running.MOV
0 hits | 77.04 MB | Posted: 3/3/25
(Posted in: 2024 Big Turbo 2)

45 hose.jpg
0 hits | 33.1 KB | Posted: 3/3/25
(Posted in: 2024 Big Turbo 2)

46 Wiring.jpg
0 hits | 68.75 KB | Posted: 3/11/25
(Posted in: 2024 Big Turbo 2)

47 too round.jpg
0 hits | 41.78 KB | Posted: 3/12/25
(Posted in: 2024 Big Turbo 2)

47 too small.jpg
0 hits | 41.5 KB | Posted: 3/12/25
(Posted in: 2024 Big Turbo 2)