44 splasdh shield done.jpg
0 hits | 52.61 KB | Posted: 3/1/25

44 air intake done.jpg
0 hits | 71.21 KB | Posted: 3/1/25

45 running.MOV
0 hits | 77.04 MB | Posted: 3/3/25

45 hose.jpg
0 hits | 33.1 KB | Posted: 3/3/25

46 Wiring.jpg
0 hits | 68.75 KB | Posted: 3/11/25

47 too round.jpg
0 hits | 41.78 KB | Posted: 3/12/25

47 too small.jpg
0 hits | 41.5 KB | Posted: 3/12/25

47 too big.jpg
0 hits | 44.21 KB | Posted: 3/12/25

48 Done.jpg
0 hits | 88.62 KB | Posted: 3/25/25

48 Done2.jpg
0 hits | 83.81 KB | Posted: 3/25/25

48 oil cooler fixed.jpg
0 hits | 75.87 KB | Posted: 3/25/25

48 oil cooler seal.jpg
0 hits | 25.32 KB | Posted: 3/25/25

48 oil cooler tool.jpg
0 hits | 50.91 KB | Posted: 3/25/25

49 melty.jpg
0 hits | 79.61 KB | Posted: 4/22/25
Inner fender melted near turbine housing

49 boost control.jpg
0 hits | 65.35 KB | Posted: 4/22/25
Boost control solenoid

50 revised PCV.jpg
0 hits | 79.28 KB | Posted: 4/28/25
Revised the PCV system a little.

52 motor.jpg
0 hits | 84.66 KB | Posted: 6/17/25
Motor as it sits 06/17/25

53 non floating seal.jpg
0 hits | 70.86 KB | Posted: 6/27/25
#5 exhaust seal where it should be.

53 floating seal.jpg
0 hits | 63.43 KB | Posted: 6/27/25
#8 intake seal floating.

53 seal on car.jpg
0 hits | 69.74 KB | Posted: 6/27/25
#5 intake seal floating and band damaged.

53 seals.jpg
0 hits | 60.5 KB | Posted: 6/27/25
#5 seals. Exhaust was okay, intake was loose.

54 springs.jpg
0 hits | 72.47 KB | Posted: 7/4/25

57 guide.jpg
0 hits | 72.18 KB | Posted: 7/25/25

57 staked.jpg
0 hits | 62.58 KB | Posted: 7/25/25

57 test.jpg
0 hits | 34.06 KB | Posted: 7/25/25

58 ring2.jpg
0 hits | 59.12 KB | Posted: 7/30/25

59 tool.jpg
0 hits | 38.6 KB | Posted: 8/21/25

59 fixed2.jpg
0 hits | 44.43 KB | Posted: 8/21/25

59 fixed1.jpg
0 hits | 40.89 KB | Posted: 8/21/25