20170224_170443.jpg
426 hits | 49.55 KB | Posted: 2/27/17
This is the reason for the wonderful time I spent on Saturday. What is depicted here is the cheap, ...

20170224_170547.jpg
135 hits | 71.01 KB | Posted: 2/27/17
Because I was in a hurry, I left the transfer case attached to the transmission for removal. Becaus...

20170224_170648.jpg
170 hits | 54.27 KB | Posted: 2/27/17
What is depicted here is the new slave cylinder placed in the bellhousing of the transmission. Noti...

20170227_175938.jpg
100 hits | 43.51 KB | Posted: 2/27/17
I've cleaned up the old slave cylinder a bit for disassembly. I want to know what makes these thing...

20170227_180216.jpg
178 hits | 29.91 KB | Posted: 2/27/17
Depicted are the constituent parts of the clutch slave cylinder. I'm not sure about the proper term...

20170227_180244.jpg
197 hits | 38.74 KB | Posted: 2/27/17
To remove the piston seal, I used a syringe with some mineral oil in it to force the piston seal out...

20170227_180449.jpg
171 hits | 23.99 KB | Posted: 2/27/17
This is the piston. Well, its less of a piston than an extension of the piston. I'm going to call ...

20170227_180501.jpg
185 hits | 28.73 KB | Posted: 2/27/17
Again, its hard to tell from the pictures, but one can see the texture of the bottom portion of this...

20170227_180509.jpg
157 hits | 22.95 KB | Posted: 2/27/17
One of the burrs can be plainly seen in the upper "corner" of the piece. Lack of proper s...

20170227_180521.jpg
145 hits | 43.32 KB | Posted: 2/27/17
This is the piston seal. The outer surface is supposed to provide a seal on the outer part of the h...

20170227_180526.jpg
160 hits | 31.42 KB | Posted: 2/27/17
The seal is quite flexible.

20170227_180600.jpg
134 hits | 44.44 KB | Posted: 2/27/17
Peering down between the outer housing and inner housing. This is where the seal is installed, and ...

20170227_180701.jpg
175 hits | 35.83 KB | Posted: 2/27/17
As one can see in this picture, the burrs have cut into parts of this piston/seal. I also removed q...