IMG_5795.JPG
2404 hits | 65.56 KB | Posted: 5/29/11
this is what we will be installing, read the guide in its entirety.
IMG_5796.JPG
1715 hits | 75.32 KB | Posted: 5/29/11
the sport receptacle is just included for reference in this picture.
step1_Page_1.jpg
2645 hits | 49.78 KB | Posted: 8/16/09
i started by removing the seats, carpet and middle a/c floor duct, you will then need to follow this...
step1_Page_2.jpg
2201 hits | 37.53 KB | Posted: 8/16/09
mrwstep1-2.jpg
2330 hits | 107.51 KB | Posted: 8/16/09
column dropped (taken after i removed the shifter)
mrwstep1.jpg
2257 hits | 118.37 KB | Posted: 8/16/09
make sure to remove the interlock connector from the column interlock (blue circle)
mrwstep2.jpg
1907 hits | 95.02 KB | Posted: 8/16/09
just pull the transmission cable off the column shifter, it won't get damaged, just pull stright bac...
mrwstep2-1.jpg
1912 hits | 101.33 KB | Posted: 8/16/09
The column shifter is now free, you will no longer need that or any of the other parts you removed, ...
mrwstep3.jpg
1810 hits | 107.27 KB | Posted: 8/16/09
This part was the hardest, i started by taking a thick flat head screw driver on the other end of th...
mrwstep2-3.jpg
2287 hits | 55.96 KB | Posted: 8/16/09
floor shift interlock 02-04 (1W3Z-3F719-AA) i removed from a Lincoln Continental with floor shifter,...
interlockextension.jpg
1819 hits | 73.25 KB | Posted: 8/16/09
note that the stock interlock connector will not reach, i used a spare Tremco unit to make an extens...
interlock.jpg
1196 hits | 41.27 KB | Posted: 10/9/12
part numbers for the screws to mount the interlock.
mrwstep4.jpg
1829 hits | 110.45 KB | Posted: 8/16/09
interlock_installed.JPG
1090 hits | 57.26 KB | Posted: 10/9/12
mrwstep5.jpg
1862 hits | 97.15 KB | Posted: 8/16/09
test the interlock, should be working.
mrwstep6.jpg
1671 hits | 92.71 KB | Posted: 8/16/09
use a small flat head screw driver to pull the taps on the plastic clip, once free push it off the m...
mrwstep7.jpg
1998 hits | 100.89 KB | Posted: 8/16/09
Hopefully, you have the floor shifter cable (6W3Z-7E395-A), otherwise you will need to follow jimh87...
mrwstep8.jpg
1766 hits | 94.07 KB | Posted: 8/16/09
from the engine bay, feed the cable though the firewall and wrap under the steering wheel, then behi...
mrwstep9.jpg
1755 hits | 86.62 KB | Posted: 8/16/09
mrwstep10.jpg
1646 hits | 96.87 KB | Posted: 8/16/09
this is the overdrive wiring.
floorshifterpinout.jpg
1632 hits | 45 KB | Posted: 8/16/09
Floor shift power pinout.
Pins 1 and 2 can be tapped into at the HVAC (A/C) control panel and the...
ciglightpower.JPG
1541 hits | 23.23 KB | Posted: 8/26/09
powerpoint.JPG
1544 hits | 31.08 KB | Posted: 8/26/09
inside the console bin.
console.jpg
1302 hits | 58.43 KB | Posted: 6/6/11
connector.jpg
1539 hits | 43.33 KB | Posted: 6/6/11
main connector
P1010166.jpg
1776 hits | 39.96 KB | Posted: 8/16/09
installed and almost complete.
**metal bracket not hard mounted yet.
P1010155.jpg
1904 hits | 55.28 KB | Posted: 8/16/09
IMG_0789.JPG
1783 hits | 56.89 KB | Posted: 8/16/09
** note
this is the a/c duct that needs to be removed prior to installing floor shifter.
P1010221.JPG
2016 hits | 56.33 KB | Posted: 8/27/09
make sure you get all the a/c duct parts for the floor shift install.
1w3z-18c420-da rear (pictur...
P1010134.JPG
2191 hits | 61.11 KB | Posted: 12/20/09
this is the bracket that will mount both the marauder gauge pod or sport receptacle.
mounts under t...
P1010130.JPG
1772 hits | 49.7 KB | Posted: 12/20/09
floor shift steering wheel shroud top.
this is the paint to match part number, its primed and rea...
IMG_3602.JPG
1652 hits | 66.49 KB | Posted: 7/28/10
6w7z-18c420-aa metal bracket (where the shifter mounts) also acts as part of the rear a/c duct work.
IMG_5797.JPG
1288 hits | 55.87 KB | Posted: 5/29/11
OEM sport/marauder dash mount with 2W3Z-54044G02-AA slidden into the frame with two bolts locking it...
IMG_5798.JPG
1090 hits | 55.68 KB | Posted: 5/29/11
IMG_5799.JPG
1116 hits | 56.26 KB | Posted: 5/29/11
IMG_5801.JPG
1182 hits | 52.29 KB | Posted: 5/29/11