P2160307.JPG
422 hits | 79.67 KB | Posted: 2/22/04
steering shaft at full compression before trimming

P2160308.JPG
424 hits | 118.65 KB | Posted: 2/22/04
joints: much better

P2160310.JPG
426 hits | 100.45 KB | Posted: 2/22/04
before cutting

P2160312.JPG
424 hits | 102.91 KB | Posted: 2/22/04
measured at half compression made a line and cut it

P2160313.JPG
421 hits | 101 KB | Posted: 2/22/04
this is how much and what I used. Not perfect for cutting straight lines but it worked.

P2160322.JPG
437 hits | 100.73 KB | Posted: 2/22/04
trimmed and all the way out

P2160323.JPG
433 hits | 103.58 KB | Posted: 2/22/04
trimmed and fully compressed

p2160304.JPG
452 hits | 63.18 KB | Posted: 2/22/04
old shaft: seen better days

P2160306.JPG
442 hits | 78.37 KB | Posted: 2/22/04
lower joint.

P2200365.JPG
448 hits | 54.42 KB | Posted: 2/22/04
new shaft installed much stouter, and the new shorty headers

steering shaft2.JPG
437 hits | 50.98 KB | Posted: 2/22/04
upper joint

p2130296.JPG
423 hits | 47.43 KB | Posted: 2/22/04
lower joint

P2160325.JPG
385 hits | 47.24 KB | Posted: 2/22/04
Had to drill a hole in the shaft for the set screw, and it wasn't quit perfect so I opened it up wit...