D44IFS96Tag.jpg
8965 hits | 77.36 KB | Posted: 7/24/07
Front axle tag on a '96 EB Bronco 5.8L E4OD 3.54 Open diff with 3-screw auto locks & 4WABS
[url=https://web.archive.org/web/20160406194744/http://www.fourdoorbronco.com/board/showthread.php?5226-Terms-amp-Abbreviations&s=82ea74ce3e3fbfba30ed93149c5de...
(Posted in: TSBs & FSAs (Recalls) for '83-96 Broncos & F150s)

Engine ID Sticker.jpg
6804 hits | 25.61 KB | Posted: 1/2/05
The engine code information label, typically located on the front of a valve cover, contains the engine build date, engine plant code and the engine code. Duplicates may also be found on the rear of a head, &/or the timing cover.

Early style:
[url=...
(Posted in: Diagrams)

BodyF.jpg
0 hits | 146.33 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights.
(Posted in: As-Bought)

BodyLHF.jpg
0 hits | 131.83 KB | Posted: 2/13/25
The hood has the typical corrosion along the front edge. But there's surprisingly little body damage. The worst might be the holes for the grill guard, which I'd like to eliminate because it makes other drivers slow down.
(Posted in: As-Bought)

BodyLHR.jpg
0 hits | 128.15 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights (now gone). But there's surprisingly little body damage.
(Posted in: As-Bought)

BodyLHS.jpg
0 hits | 115.37 KB | Posted: 2/13/25
I plan to remove the spotlight, dog dishes, wrap scraps, duct tape on the roof, and probably the grill guard.
(Posted in: As-Bought)

BodyRHR.jpg
0 hits | 130.52 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights (now gone). But there's surprisingly little body damage. I plan to add a factory hitch receiver & roof rack.
(Posted in: As-Bought)

BodyRH.jpg
0 hits | 153.3 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights (now gone). But there's surprisingly little body damage. I plan to remove the spotlight, dog dishes, wrap scraps, ...
(Posted in: As-Bought)

PushR.jpg
0 hits | 130.82 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights (now gone). But there's surprisingly little body damage. I plan to remove the spotlight, dog dishes, wrap scraps, ...
(Posted in: As-Bought)

PushL.jpg
0 hits | 130.82 KB | Posted: 2/13/25
Most of the wrap was removed before the auction, except the front tow point cover, and some scraps around the door handles & taillights (now gone). But there's surprisingly little body damage. I plan to remove the spotlight, dog dishes, wrap scraps, ...
(Posted in: As-Bought)

EngFr1.jpg
0 hits | 137.99 KB | Posted: 2/13/25
Other than the dust, the engine bay is very clean, and everything works.
(Posted in: As-Bought)

EngFr2.jpg
0 hits | 143.57 KB | Posted: 2/13/25
Other than the dust, the engine bay is very clean, and everything works.
(Posted in: As-Bought)

EngRH1.jpg
0 hits | 139.8 KB | Posted: 2/13/25
Other than the dust, the engine bay is very clean, and everything works.
(Posted in: As-Bought)

EngRr1.jpg
0 hits | 138.47 KB | Posted: 2/13/25
Other than the dust, the engine bay is very clean, and everything works. I'm not sure why there's handwriting on the back of the core support - the vehicle history doesn't show any front-end damage.
(Posted in: As-Bought)

EngRrC.jpg
0 hits | 114.27 KB | Posted: 2/13/25
Despite the rear cat having been removed at least twice, everything back here looks factory.
(Posted in: As-Bought)

RoofHoles.jpg
0 hits | 123.45 KB | Posted: 2/13/25
Not much effort was put into deleting the antennas & lights. I think the headliner wiring harness was also left partially disconnected (or damaged) because most of the dome lights don't work.

UPDATE: Turns out a couple of fuses were blown. Of course...
(Posted in: As-Bought)

Spare3.jpg
0 hits | 127.81 KB | Posted: 2/13/25
Like the rest of the floors, the spare well was littered with cut zip-ties, wires, screws, nuts, & bolts. I'll probably remove the floor-stiffening impact brace, and look for a factory jack & lug wrench.
(Posted in: As-Bought)

SeatLHFsplit.jpg
0 hits | 92.95 KB | Posted: 2/13/25
...but the driver's seat does have the typical split. I'll probably upgrade the front seats.
(Posted in: As-Bought)

PulleyAlign.jpg
0 hits | 65.99 KB | Posted: 4/28/25
The cobbled-together engine & brackets resulted in the alternator pulley being about a half inch behind the water pump pulley, making the belt bend slightly.
(Posted in: As-Was & Repairs)

Spoiler16PIU.jpg
0 hits | 42.68 KB | Posted: 4/29/25
Spoiler Removal

Apparently, it's very difficult.
----------------------------------------------------------------------------------------------
Rear Spoiler Removal
IF THE IMAGE IS TOO SMALL, click it.
__________________
NOTE: If equipped wit...
(Posted in: General Tech)

Ctsy16.jpg
0 hits | 44.36 KB | Posted: 4/29/25
Courtesy Lamps 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

ExtrLight16.jpg
0 hits | 48.97 KB | Posted: 4/29/25
Exterior Lamps 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

Fog16.jpg
0 hits | 65.13 KB | Posted: 4/29/25
Fog Lamps 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

FusesBCN.jpg
0 hits | 62.21 KB | Posted: 4/29/25
BCM Fuses 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

Headliner16Conn.jpg
0 hits | 51.6 KB | Posted: 4/29/25
Headliner Connector 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

Illumination16.jpg
0 hits | 36.95 KB | Posted: 4/29/25
Illumination 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

Keypad16b.jpg
0 hits | 84.1 KB | Posted: 4/29/25
Keypad 2016 Explorer
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

PW16.jpg
0 hits | 54.35 KB | Posted: 4/29/25
Power Windows 2016 PIU
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: General Tech)

PNr.JPG
2377 hits | 77.72 KB | Posted: 3/9/11
In typical Ford fashion, the passenger (RIGHT) side PN is one lower (F4TZ-16A470-A) than the driver's (F4TZ-16A471-A).
(Posted in: Cab Steps)

RustedStud.JPG
2394 hits | 84.08 KB | Posted: 3/9/11
In addition to the bracket tubing rusting out, the step mounting studs often rust off. Check yours before ordering; if they're still usable, I'll send slightly different hardware.

If they're rusted, or if they break off during removal, use this pro...
(Posted in: Cab Steps)

Step94Bcopr.JPG
2265 hits | 134.16 KB | Posted: 2/23/12
SOLD Bronco Left Original (Factory) Cab Step missing tabs

No cracks or scuffs on the face; minor abrasion on the bottom lip.

[url=https://www.supermotors.net/registry/media/1169073][img]https://www.supermotors.net/getfile/1169073/thumbnail/paintcol...
(Posted in: Cab Steps)

NWatk12X.jpg
0 hits | 82.65 KB | Posted: 5/9/25
Another junker 12 XLT
(Posted in: Spare Parts)

Chairs03.jpg
0 hits | 110.4 KB | Posted: 5/9/25
These came from a '17 XLT that had been hit so hard that the front passenger door & its opening were obliterated. The floor was wrinkled under both front seats, which couldn't be unbolted. But these came out fairly easily.
IF THE IMAGE IS TOO SMALL,...
(Posted in: 2nd Row Seats)

Acquired.jpg
0 hits | 59.74 KB | Posted: 5/9/25
The first step was to disassemble them, which turned out to be easier than it looked.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Carpet.jpg
0 hits | 71.72 KB | Posted: 5/9/25
The rear carpet was in good shape, so I bought & washed it, too.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

FloorMats.jpg
0 hits | 77.26 KB | Posted: 5/9/25
Since the mats were there & not too rough, I got them, too.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Cleaned.jpg
0 hits | 48.6 KB | Posted: 5/9/25
The upholstery looked pretty bad, but after scrubbing it with cream hand cleaner, and running it through the washing machine, it looks a lot better than you'd expect.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Compared.jpg
0 hits | 57.09 KB | Posted: 5/10/25
Not bad for $60 and a few hours' work.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Crap.jpg
0 hits | 84.03 KB | Posted: 5/11/25
The seats that don't tumble came out, as did the damaged '15 Ltd. rear carpet, and the last piece of the floor reinforcement. After the '17 XLT carpet dried, it was vacuumed to remove the last of the hair from it.
IF THE IMAGE IS TOO SMALL, click it.
(Posted in: 2nd Row Seats)

Flips.jpg
0 hits | 78.77 KB | Posted: 5/11/25
The strike bars & '17 XLT carpet went in (with the rear console delete cover), then the floor mats & WeatherTech 443592. Now it has fold & tumble 2nd-row seats. Even though the stone upholstery doesn't match the front seats', it doesn't look bad.
IF...
(Posted in: 2nd Row Seats)

IMG_8926.JPG
0 hits | 96.19 KB | Posted: 5/12/25
(Posted in: 2016AATAURUS77K)

IMG_8927.JPG
0 hits | 89.97 KB | Posted: 5/12/25
(Posted in: 2016AATAURUS77K)

IMG_8928.JPG
0 hits | 85.03 KB | Posted: 5/12/25
(Posted in: 2016AATAURUS77K)

IMG_8929.JPG
0 hits | 84.83 KB | Posted: 5/12/25
(Posted in: 2016AATAURUS77K)

IMG_8930.JPG
0 hits | 93.86 KB | Posted: 5/12/25
(Posted in: 2016AATAURUS77K)