|
|
Hits: 8406
Size: 92.54 KB
Posted: 4/25/04
The hood has been removed. Getting ready to pull the motor. | 
Hits: 2313
Size: 80.01 KB
Posted: 4/25/04
Setting the hood aside for now. | 
Hits: 1910
Size: 65.48 KB
Posted: 4/25/04
Cracked rubber seal. | 
Hits: 1810
Size: 60.98 KB
Posted: 4/25/04
Rusted battery tray and jerry-rigged battery mount. | 
Hits: 1721
Size: 62.6 KB
Posted: 4/25/04
Alternator removed |
Hits: 1576
Size: 58.69 KB
Posted: 4/25/04
Power steering pump removed | 
Hits: 1680
Size: 64.24 KB
Posted: 4/25/04
| 
Hits: 1597
Size: 75.5 KB
Posted: 4/25/04
| 
Hits: 1645
Size: 63.32 KB
Posted: 4/25/04
Removing the radiator | 
Hits: 1635
Size: 62.12 KB
Posted: 4/25/04
Radiator removed -- looks like it'll need to be plugged or replaced (notice the corroded fins in gre... |
Hits: 1589
Size: 68.5 KB
Posted: 4/25/04
Radiator removed | 
Hits: 1578
Size: 63.69 KB
Posted: 4/25/04
Removing valve covers | 
Hits: 1493
Size: 74.74 KB
Posted: 4/25/04
| 
Hits: 1465
Size: 63.94 KB
Posted: 4/25/04
| 
Hits: 1600
Size: 58.55 KB
Posted: 4/25/04
Removing driveshaft |
Hits: 1549
Size: 48.31 KB
Posted: 4/25/04
Removing bolts from engine mounts | 
Hits: 1505
Size: 69.37 KB
Posted: 4/25/04
| 
Hits: 1620
Size: 46.18 KB
Posted: 4/25/04
Removing bolts from the flanges on the headers | 
Hits: 1936
Size: 87.28 KB
Posted: 4/25/04
Pulling the motor and trans out | 
Hits: 1880
Size: 82.47 KB
Posted: 4/25/04
Another shot of the engine/trans coming out |
Hits: 1550
Size: 76.74 KB
Posted: 4/25/04
Cruise-o-matic removed | 
Hits: 1532
Size: 64.48 KB
Posted: 4/25/04
heads removed | 
Hits: 1676
Size: 75.95 KB
Posted: 4/25/04
Heads removed | 
Hits: 1975
Size: 75.42 KB
Posted: 4/25/04
Block after removal of heads. Notice buildup of burned oil and the remainder of the head gasket. | 
Hits: 1656
Size: 69.48 KB
Posted: 4/25/04
|
Hits: 1531
Size: 71.14 KB
Posted: 4/25/04
Another angle of the block | 
Hits: 1508
Size: 77.71 KB
Posted: 4/25/04
Another head removed | 
Hits: 1524
Size: 74.95 KB
Posted: 4/25/04
Upside down on the engine stand. | 
Hits: 1538
Size: 66.67 KB
Posted: 4/25/04
| 
Hits: 1499
Size: 68.01 KB
Posted: 4/25/04
Getting ready to install windage tray, new gaskets, and new oil pump. |
Hits: 1564
Size: 59.46 KB
Posted: 4/25/04
Cleaning off the old oil pan gasket | 
Hits: 1508
Size: 59.46 KB
Posted: 4/25/04
| 
Hits: 1716
Size: 64.35 KB
Posted: 4/25/04
Fully assembled -- notice the gold windage tray between the block and the oil pan. | 
Hits: 2300
Size: 68.44 KB
Posted: 4/25/04
Cleaned up the block and pistons with a wire brush to get rid of the oil and gunk buildup | 
Hits: 1610
Size: 72.8 KB
Posted: 4/25/04
Dirty |
Hits: 1515
Size: 72.69 KB
Posted: 4/25/04
352 stamping (it is a 390 block) | 
Hits: 1663
Size: 79 KB
Posted: 4/25/04
C6ME-A casting on the 390 block | 
Hits: 1574
Size: 65.1 KB
Posted: 4/25/04
Clean | 
Hits: 1531
Size: 82.46 KB
Posted: 4/25/04
On the engine stand | 
Hits: 1703
Size: 71.9 KB
Posted: 4/25/04
Engine compartment is empty. |
Hits: 1645
Size: 85.63 KB
Posted: 4/25/04
Loading the parts into the truck for the ride back home. | 
Hits: 1807
Size: 87.05 KB
Posted: 4/25/04
Winching her onto the trailer for the ride home. | 
Hits: 2382
Size: 107.65 KB
Posted: 4/25/04
All set! Ready to sit for a month or two in the garage without a motor and trans. | | |
Pulling the 390 - 04/2004