100_2563.JPG 761 hits | 51.54 KB | Posted: 5/3/09 this is the rear fender height with the modified Ford rear coil springs installed; about 26.5" high;...
100_2531.JPG 729 hits | 47.45 KB | Posted: 5/3/09 this is with the "big block-cut" coils in front and the modified coils in the rear; the car looks go...
100_2554.JPG 709 hits | 66.72 KB | Posted: 5/3/09 replacing the rear coil springs; the shocks have been removed and the the vehicle gets jacked up unt...
100_2552.JPG 681 hits | 66.81 KB | Posted: 5/4/09 right hand front fender height, with 'lowered' coil springs installed {new big-block coils with 1.5 ...
100_2622.JPG 771 hits | 63.05 KB | Posted: 5/10/09 I replaced the A-arm bushings and lower control arm bushings with new polyurethane bushings from Ene...
100_2623.JPG 755 hits | 78.12 KB | Posted: 5/10/09 new lower ball joints and coil springs to be installed also.
100_2636.JPG 709 hits | 60.27 KB | Posted: 5/10/09 spring compressor tool being used to install new front coil springs; this is a lot of work and DANGE...
100_2626.JPG 732 hits | 74.68 KB | Posted: 5/10/09 front coil spring installed.
100_2637.JPG 710 hits | 59.99 KB | Posted: 5/10/09 this is the bushing in the lower control arm; this was the good one!
100_2621.JPG 700 hits | 67.68 KB | Posted: 5/10/09 these are new "small block" coils, uncut, which are about 18 5/8" long.
100_2633.JPG 732 hits | 49.3 KB | Posted: 5/10/09 on the left are "small block" coils {my NAPA dealer found me a brand new pair in stock; it took a we...
100_2641.JPG 720 hits | 60.77 KB | Posted: 5/10/09 front fender height is now about 27" with the new "small block" coils installed {uncut}
I will let ...
100_3099.JPG 678 hits | 59.52 KB | Posted: 9/10/09 this is the rear fender height with the "stock" rear coil spings installed.
100_3075.JPG 724 hits | 42.6 KB | Posted: 9/8/09 I've replaced the front coils again! now, they are the "small block" coils with 1/2 coil cut off; fr...
100_2651.JPG 670 hits | 73.97 KB | Posted: 9/10/09 rearview with the "stock" coil springs installed in the rear and the stock "small block" coils in fr...
100_2650.JPG 724 hits | 71.42 KB | Posted: 9/10/09 reaview with the stock rear coil springs installed; sits a little high, but rides nice!
100_3065.JPG 685 hits | 65.96 KB | Posted: 9/8/09 this is the stock Ford 10.7 cast iron rotor {before upgrade} with the stock ford single piston calip...
100_3232.JPG 785 hits | 53 KB | Posted: 11/21/09 oem Ford spindle and axle
100_3097.JPG 715 hits | 62.79 KB | Posted: 9/10/09 these are the new brake rotors I am installing, from I-Rotors {E-Bay}; they are the same diameter as...
Chassis
