1973 Ford Ranchero Re-paint pictures, videos, and sounds

jeff931 > 1973 Ford Ranchero > Re-paint

100_0307.JPG
543 hits | 95.46 KB | Posted: 2/7/10
off to a lousy start; dead battery slows me down moving the car to the body shop; I think I left the...

100_0183.JPG
489 hits | 57.54 KB | Posted: 2/7/10
We sprayed out six different paint samples, to see what it might really look like on the car:

ora...

100_0185.JPG
504 hits | 51.04 KB | Posted: 2/7/10
This was the best one:

its a base/clear combo:
Omni AU "prophet orange" base coat, then a thin ...

100_0316.JPG
531 hits | 61.79 KB | Posted: 2/7/10
the black rub rail that ran down the length of the car got peeled off, we aren't going to re-install...

100_0330.JPG
710 hits | 51.33 KB | Posted: 2/7/10
Both doors had rust holes in the lower rear corners, so we cut out the rust and welded in new steel.

100_0297.JPG
635 hits | 51.04 KB | Posted: 2/7/10
there was a little dent in the left rear quater, probably caused by the bumper years ago.

100_0310.JPG
552 hits | 41.65 KB | Posted: 2/7/10
the front of the hood is full on bondo, and its starting to crack; we'll grind it all off and fix t...

100_0291.JPG
586 hits | 65.29 KB | Posted: 2/7/10
the top of the right fend has these tiny bubbles in the paint; we'll grind it off to have a better l...

100_0292.JPG
568 hits | 51.11 KB | Posted: 2/7/10
the paint was bubbling on both doors, near the bottom, so we'll grind off the paint to see how much ...

100_0336.JPG
571 hits | 46.47 KB | Posted: 2/7/10
Here is the patch we welded into the passenger door outer skin.

100_0344.JPG
553 hits | 68.12 KB | Posted: 2/7/10
We've ground off all the paint and bondo, so we can properly fix the dent; there was about 3/8" of b...

100_0345.JPG
486 hits | 54.49 KB | Posted: 2/7/10
lousy picture, but the right rear quarter had been poorly repaired previously; it looks like they pr...

100_0315.JPG
559 hits | 76.43 KB | Posted: 2/7/10
the right rear quarter was full of holes; they probably used an old "screw-type" dent puller, but di...

100_0346.JPG
636 hits | 63.1 KB | Posted: 2/7/10
that's bondo, oozing through holes in the panel!

100_0365.JPG
594 hits | 63.43 KB | Posted: 2/7/10
the first skim coat of kitty hair bondo has been applied and already sanded flat.

100_0284.JPG
562 hits | 76.53 KB | Posted: 2/7/10
I'm going to remove the light buckets; they aren't lined up correctly and there is a lot of was and ...

100_0348.JPG
625 hits | 70.56 KB | Posted: 2/7/10
the grill has been removed; next wil be the upper valance and the light buckets.

100_0357.JPG
602 hits | 79.81 KB | Posted: 2/7/10
Front valance has been removed; it had a dent in it and more holes and bondo, so I am going to repla...

100_0358.JPG
572 hits | 82.77 KB | Posted: 2/7/10
I removed the front valance, grill, and both light buckets, since most of it wasn't aligned correctl...

100_0361.JPG
573 hits | 75.77 KB | Posted: 2/7/10
Day 2: the block sanding will start now, and the holes we welded up got ground flat and a spot of bo...

100_0295.JPG
553 hits | 70 KB | Posted: 2/7/10
I got rear-ended this summer, by an Escalade, so the tailgate has a dent

100_0352.JPG
649 hits | 65.39 KB | Posted: 2/7/10
We used a dent puller to straighten out the tailgate, and then welded up the holes.

100_0342.JPG
563 hits | 47.95 KB | Posted: 2/7/10
I got rear-ended last summer, so there was a dent in the tailgate; there was already a bunch of bond...

100_0372.JPG
592 hits | 61.37 KB | Posted: 2/7/10
a second thin coat of bondo got applied on the tailgate and the rear quarter panel.

100_0293.JPG
606 hits | 89.14 KB | Posted: 2/7/10
the rust on the outer skin ate through the inner skin also. we will weld new metal in to fix it.

100_0283.JPG
632 hits | 70.24 KB | Posted: 2/7/10
it looks like someone tried to "glue" the under-hood insulation in place; we'll clean it off and rep...

100_0366.JPG
531 hits | 64.05 KB | Posted: 2/7/10
there is three coats of paint on the back half of the car, and four on the front half; it was red or...

100_0379.JPG
582 hits | 56.75 KB | Posted: 2/9/10
we layed on two coats of primer on the hood, then blocked-sanded it.

100_0387.JPG
614 hits | 57.62 KB | Posted: 2/9/10
Day 4: I sanded off two coats of paint off the roof, down to the second coat of paint, which was bri...

100_0388.JPG
581 hits | 48.11 KB | Posted: 2/9/10
the car was originally 2B "bright red", then it was painted orange, then repainted the current orang...

100_0389.JPG
624 hits | 54.66 KB | Posted: 2/9/10
Day 5: the first round of block sanding is complete, I removed at least two layers of paint with a ...

100_0393.JPG
669 hits | 56.79 KB | Posted: 2/9/10
Kim is laying on the first coat of Omni MH283 hi-build primer; he'll put on two coats, most of which...

100_0394.JPG
758 hits | 47.71 KB | Posted: 2/9/10
the flames are coming! these are just primer

100_0396.JPG
620 hits | 61.54 KB | Posted: 2/9/10
Day 6: more hi-build primer...

100_0396.JPG
612 hits | 61.54 KB | Posted: 2/9/10

100_0402.JPG
682 hits | 59.81 KB | Posted: 2/14/10
Day 7: three coats of high-build grey primer, which got block-sanded, then three more coats, which a...

100_0414.JPG
723 hits | 57.33 KB | Posted: 2/14/10
followed by a coat of white Omni MR170 epoxy sealer just before the color base coat

100_0422.JPG
732 hits | 64.33 KB | Posted: 2/14/10
Day 8: then two coats of Omni MBC "Prophet Orange 61067" base coat (which is actually a Ford color.)

100_0437.JPG
686 hits | 64.81 KB | Posted: 2/14/10
then we layed out the flames with 1/8" fine line tape.

100_0439.JPG
598 hits | 67.2 KB | Posted: 2/14/10
and masked off the flames, then we sprayed on a little Omni M175 Gold Pearl in DBC500 binder.

100_0442.JPG
701 hits | 54 KB | Posted: 2/14/10
then we finished it off with three coats of ShopLine 620 clear

100_0444.JPG
635 hits | 51.84 KB | Posted: 2/14/10
the "ghost-flames" are only visible from certain angles, and under direct light. you can barely see ...

100_0445.JPG
646 hits | 53.78 KB | Posted: 2/14/10

100_0446.JPG
530 hits | 56.51 KB | Posted: 2/14/10
the flames fade towards the front of the car.

100_0447.JPG
570 hits | 58.38 KB | Posted: 2/14/10

100_0448.JPG
581 hits | 54.17 KB | Posted: 2/14/10

100_0449.JPG
605 hits | 54.93 KB | Posted: 2/14/10

100_0450.JPG
623 hits | 54.18 KB | Posted: 2/14/10

100_0419.JPG
606 hits | 65.81 KB | Posted: 2/14/10
this is the base coat; Omni AU MBC "prohet orange 61067"

100_0454.JPG
581 hits | 61.58 KB | Posted: 2/14/10

100_0458.JPG
547 hits | 65.81 KB | Posted: 2/14/10
the drivers door, post repairs.

100_0461.JPG
691 hits | 52.87 KB | Posted: 2/14/10
passenger door, post repair.

100_0466.JPG
536 hits | 57.18 KB | Posted: 2/14/10

100_0469.JPG
675 hits | 81.56 KB | Posted: 2/15/10
finally got the car outside this morning; it looks even better

100_0470.JPG
636 hits | 76.21 KB | Posted: 2/15/10

100_0472.JPG
635 hits | 71.82 KB | Posted: 2/15/10

100_0473.JPG
653 hits | 64.66 KB | Posted: 2/15/10
there is a little run in the clear off the corner of this marker lite. we'll just block it off and p...

100_0474.JPG
569 hits | 43.91 KB | Posted: 2/15/10
I got a big sag in the clear on this body line above the rear fenderwell; we'll block sand it off an...

100_0475.JPG
743 hits | 67.68 KB | Posted: 2/15/10
the "ghost-flames" turned out great, but they are really hard to get a photo of

100_0476.JPG
589 hits | 83.93 KB | Posted: 2/15/10

100_0478.JPG
592 hits | 87.91 KB | Posted: 2/15/10
re-assembly has started...

100_0477.JPG
573 hits | 76.11 KB | Posted: 2/15/10
my gas cap turned out great! it was so ugly before--it only had paint on the upper half, the bottom ...