|
|
Hits: 68
Size: 100.58 KB
Posted: 11/22/17
4.10s for $80? Plus the rest of the frame? Um, yes please. Now, where is that 4.10 10.5? | 
Hits: 56
Size: 91.78 KB
Posted: 11/22/17
Formerly part of a PSD truck. Decent chance this front end will end up under dads dually. | 
Hits: 50
Size: 89.04 KB
Posted: 11/22/17
Flabbergasted with how it fit the trailer. | 
Hits: 39
Size: 79.64 KB
Posted: 2/16/19
Sterling 10.25 from a 1992 F350 (non-c&c). open 4.10s, 3.5 wide shoes and 72-inch wms to wms. | 
Hits: 52
Size: 82.44 KB
Posted: 2/16/19
Starting the strip down. Most bolts either had to be broken off or cut off. |
Hits: 34
Size: 62.81 KB
Posted: 2/16/19
Legit Ford 4.10s. So happy. | 
Hits: 29
Size: 84.8 KB
Posted: 2/16/19
Came from a northern truck that was used to plow. | 
Hits: 22
Size: 89.19 KB
Posted: 2/16/19
Four hours later it is all stripped as far as I am willing to and wire wheeled. Just waiting for dry... | 
Hits: 25
Size: 71.9 KB
Posted: 3/18/19
After the acid wash or as Por15 call it Metal Prep. | 
Hits: 34
Size: 68.53 KB
Posted: 3/18/19
First coat of Por15. Never used it before. I was surprised by how thin it was, I expected rather thi... |
Hits: 34
Size: 74.71 KB
Posted: 3/18/19
Complete first coat to the housing. Did not do the cover as I will replace that. The dried coat is a... | 
Hits: 51
Size: 63.71 KB
Posted: 3/29/19
Aaaaand that is what Por15 looks like when you rush it. Eh, it is the backing plate so I am not that... | 
Hits: 58
Size: 89.08 KB
Posted: 4/4/19
I find doing the brakes are supremely easier with the plates off the truck. | 
Hits: 73
Size: 74.46 KB
Posted: 4/4/19
Since I needed a new diff cover anyway: later model 10.5 finned aluminum (08-10 Super Duties.) Dorma... | 
Hits: 64
Size: 55.83 KB
Posted: 4/4/19
There is a chance I might need to get a new pinion yoke. This one is for the "short" pinio... |
Hits: 66
Size: 68.62 KB
Posted: 4/5/19
New yoke is here! Yukon 41038. Sterling short 1350. Looks nice. | 
Hits: 89
Size: 69.7 KB
Posted: 4/5/19
Looks like it is ever so slightly beefier. Might just be me? | 
Hits: 58
Size: 88.35 KB
Posted: 4/7/19
The result of a DRW rear end in an SRW truck. It looks much worse in person. | 
Hits: 56
Size: 61.7 KB
Posted: 4/7/19
Yep, it sticks out...too much. Oh well, just need to live with it for a few months till PMF sends my... | 
Hits: 58
Size: 95 KB
Posted: 4/7/19
Heard a brake noise come from no where. After putting 20-25 miles on it with no issue. |
Hits: 59
Size: 78 KB
Posted: 4/7/19
Shoe retention spring came off. Heard a rotational grinding noise that I thought was bearing noise a... | 
Hits: 60
Size: 86.46 KB
Posted: 4/23/19
Super Duty Dana 50...a bit rough. Not the deal of the century but not a ripoff either. | 
Hits: 66
Size: 68.66 KB
Posted: 4/23/19
Looks nasty. Good thing I do not need them. | | |
4.10s.......eventually