1974 Mercury Bobcat pictures, photos, videos, and sounds

jeff931 > 1974 Mercury Bobcat

1974 Mercury Bobcat

Owner:	jeff931 (All of this user's registries on SuperMotors)
From:	Slave Lake, Alberta, Canada (Other registries outside the U.S)
Year, Make, & Model:	1974 Mercury Bobcat
Avatar:
Clubs:	SuperFord.org (Other vehicles in this club)
Nickname:	Bobcat
Mileage:
Engine:	It will be a Ford 377 Cleveland stroker, 4 bolt OEM iron block bored 0.030" over, line honed and decked; OEM crank offset ground for 3.75 stroke and 2.100" chevy-size rod journals, SCAT Q-Lite H-Beam LS rods, custom JE pistons with thin rings and 12.5:1 CR, Melling High Volume oil pump with Milodon rear sump steel pan with windage tray and pickup, King bearings, ATI super damper, custom Bullet roller camshaft, 4V closed chamber OEM iron heads with double valve springs and ti retainers and stud girdle, Demon 850 Race double pumper carb on a Trick Flow single plane aluminum manifold, scratch-built 2" headers, MSD billet distributor, MSD 6AL ingnition box, MSD two-step box, MSD HV coil, MSD 8.5 mm plug wires, Autolite spark plugs.
Drivetrain:	It will be a C6 I built with wide ratio planetary gear set, Koleen clutches, a TCS manual reverse-valve body and a 9 inch TCS convertor, B&M Megashifter, B&M line-lock.
Notes:	An old drag car that I bought on the internet, just a rolling chassis without an engine or transmission. It already had a mild steel 2x3" frame and roll cage, a ladder bar/leaf spring rear suspension, with a narrowed 12-bolt chevy rear end with Strange spool and axles. Front suspension is stock coil springs. I just started restoring it to what a Sportsman Pro drag car from the late 70's-early 80's might have looked like.
Last Updated:	6/28/2018
Hits:	1672