IMG_20161122_154320084-3120x2340.jpg
294 hits | 40.88 KB | Posted: 11/28/16
Replacing the milemarker lockouts with Warns on my solid axle Dana44, but this process should be exa...

IMG_20161122_154327743-3120x2340.jpg
249 hits | 62.24 KB | Posted: 11/28/16
Here are the shiny new Warns. They come with all the hardware you need to swap.

IMG_20161122_160708351_HDR-2340x3120.jpg
269 hits | 53.7 KB | Posted: 11/28/16
Old milemarker hub, they use a hex head bit on the retaining screws.

IMG_20161122_160801116_HDR-2340x3120.jpg
242 hits | 53.34 KB | Posted: 11/28/16
6 total and the lockout cover should come right off.

IMG_20161122_160910686-2340x3120.jpg
268 hits | 51.25 KB | Posted: 11/28/16

IMG_20161122_160918764-2340x3120.jpg
249 hits | 53.04 KB | Posted: 11/28/16
next step is to fish out the retaining ring. this holds the lockout body in place inside the hud. It...

IMG_20161122_161012778-2340x3120.jpg
258 hits | 46.84 KB | Posted: 11/28/16

IMG_20161122_161117810-2340x3120.jpg
282 hits | 43.8 KB | Posted: 11/28/16
and there's the ring.

IMG_20161122_161144819-2340x3120.jpg
259 hits | 53.1 KB | Posted: 11/28/16
now use a couple of your bolts to pull the lockout body free from the hub..it should slide right out...

IMG_20161122_161152676_HDR-2340x3120.jpg
267 hits | 46.48 KB | Posted: 11/28/16

IMG_20161122_161237086_HDR-2340x3120.jpg
298 hits | 50.31 KB | Posted: 11/28/16
with the old lockout removed the new one is ready to go in..the Warns come pre-greased, you don't wa...

IMG_20161122_161312659_HDR-2340x3120.jpg
275 hits | 51.19 KB | Posted: 11/28/16
new lockout body slides right into place. on the TTB axles you will need to add the snap ring (comes...

IMG_20161122_161324723_HDR-2340x3120.jpg
251 hits | 57.72 KB | Posted: 11/28/16
new lockout body fully seated and don't forget the retaining ring.

IMG_20161122_161346202-2340x3120.jpg
286 hits | 54.45 KB | Posted: 11/28/16
ready to button it up..once you put the bolts in for the cover, check the dial on the lockout to mak...