Steering1.JPG 454 hits | 72.48 KB | Posted: 2/3/14 There's some noticeable bumpsteer with the stock pitman arm being unaligned to the track bar. It's ...
Steering3.JPG 513 hits | 57.72 KB | Posted: 2/3/14 This is after installing the correct drop pitman arm. (2/26/07) It's actually better than it appear...
00AsIs.JPG 702 hits | 91.48 KB | Posted: 9/9/10 Frank has been driving this way for about a year, with no major problems. It's much better than bef...
01Connected.JPG 786 hits | 82.38 KB | Posted: 9/9/10 I test fitted the bracket by pulling the track bar bolt and dropping the bar (the truck didn't move ...
02Connected.JPG 786 hits | 82.45 KB | Posted: 9/9/10 Here, it's obvious how far away from the frame the new bracket is.
03Connected.JPG 767 hits | 96.19 KB | Posted: 9/9/10 It's pushed up as far as possible (against the bottom of the frame), and the hole in the original br...
04Connected.JPG 839 hits | 105.1 KB | Posted: 9/9/10 Just another angle showing how it sits.
05Connected.JPG 750 hits | 89.86 KB | Posted: 9/9/10 Note that this is an adjustable track bar, and it's adjusted all the way in.
11Flat.JPG 731 hits | 94.15 KB | Posted: 9/9/10 Since it doesn't lie flat with the bolt in, I removed it to see how far away it is from the track ba...
12Flat.JPG 733 hits | 78.17 KB | Posted: 9/9/10 Since it doesn't lie flat with the bolt in, I removed it to see how far away it is from the track ba...
13Flat.JPG 697 hits | 73.66 KB | Posted: 9/9/10 Since it doesn't lie flat with the bolt in, I removed it to see how far away it is from the track ba...
14Flat.JPG 706 hits | 99.43 KB | Posted: 9/9/10 But pressing against the frame bracket does nothing to align it with the hole.
21Aligned.JPG 740 hits | 98.58 KB | Posted: 9/9/10 So here it is flat against the frame AND pushed down until the upper hole is aligned with the one in...
22Aligned.JPG.JPG 757 hits | 76.31 KB | Posted: 9/9/10 It's obvously flat against the frame, but it's equally obvious that the holes aren't drilled straigh...
23Aligned.JPG 818 hits | 80.27 KB | Posted: 9/9/10 It's obvously flat against the frame, but it's equally obvious that the holes aren't drilled straigh...
24Aligned.JPG 883 hits | 96.1 KB | Posted: 9/9/10 Just another angle showing how far away from the bar eye the bracket's hole is when the bracket is f...
TrackBarDropBracket.JPG 725 hits | 93.05 KB | Posted: 6/3/11 THAT's where it goes: on a '76-77 frame. No wonder it didn't fit on a '75.
TrackBar Drop Bracket
