The Hellwig anti-sway bar kit comes with the worst directions known to mankind.  Without pictures, i...
Url
Tag
Img
Thumb
Here are the parts laid out on the floor.  When you're installing your sway bar, it's also a great o...
Url
Tag
Img
Thumb
Jack your Excursion up like this in the rear.  You will need tall jackstands that can support the we...
Url
Tag
Img
Thumb
Make a note for where your parking break cable runs around this shock/heate plate.  I had to refer b...
Url
Tag
Img
Thumb
Unbolt the shock from the axle housing.
Url
Tag
Img
Thumb
Locate the two bolts at the top of the shock -- these will need to be unbolted in order to remove th...
Url
Tag
Img
Thumb
You will need to use an extension on your ratching.  The space is really tight to fit your hand and ...
Url
Tag
Img
Thumb
This is what the factory shock looks like when it's unbolted from the vehicle.  You will need to rem...
Url
Tag
Img
Thumb
Repeat for the other shock.  Here's both shocks removed.
Url
Tag
Img
Thumb
Install the bottom mount on the shock.  If you are installing Rancho RS9000's or any other type of a...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Reinstall the shocks and the rear sway bar.  This can be done with one person and is fairly easy to ...
Url
Tag
Img
Thumb
Another angle of the Hellwig bar during installation.
Url
Tag
Img
Thumb
Here's what it looks like when you peak underneath the Excursion when it's fully installed.  Total i...
Url
Tag
Img
Thumb
Passenger side drop bracket for the Hellwig sway bar
Url
Tag
Img
Thumb
Another shot of the sway bar (it's been installed for over 4 years now)
Url
Tag
Img
Thumb
Another shot of the sway bar (it's been installed for over 4 years now)
Url
Tag
Img
Thumb
Driver side sway bar mount
Url
Tag
Img
Thumb
Passenger side sway bar mount
Url
Tag
Img
Thumb
 

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog