|
|
Hits: 2447
Size: 56.43 KB
Posted: 8/9/04
The dashboard before removal. | 
Hits: 2514
Size: 53.14 KB
Posted: 8/9/04
Old install of CVA-1005. | 
Hits: 2661
Size: 55.05 KB
Posted: 8/9/04
CVA-1005 with screen closed. | 
Hits: 2582
Size: 52.41 KB
Posted: 8/9/04
Pulling front dash panel off. | 
Hits: 2728
Size: 46.64 KB
Posted: 8/9/04
Removing dash panel (transmission shifter must be down in 1st gear to remove this panel completely). |
Hits: 2726
Size: 49.28 KB
Posted: 8/9/04
Removing the 4x4, defrost, and parking sensor plugs. Note: Blue plug is for the parking sensor, the... | 
Hits: 2481
Size: 44.79 KB
Posted: 8/9/04
2 more plugs need to be removed from the headlight controls before removing the dash panel. | 
Hits: 2335
Size: 51.18 KB
Posted: 8/9/04
Close-up of the headline plugs after removal. | 
Hits: 2483
Size: 58.55 KB
Posted: 8/9/04
Dash panel removed. I have an LED wired into the front dash panel without quick disconnects which m... | 
Hits: 2227
Size: 59.15 KB
Posted: 8/9/04
Another angle with the dash panel removed. |
Hits: 2338
Size: 60.12 KB
Posted: 8/9/04
Bracket (or lack thereof) holding the CVA-1005 in place. | 
Hits: 2118
Size: 54.53 KB
Posted: 8/9/04
Removing the CVA-1005. | 
Hits: 2162
Size: 56.61 KB
Posted: 8/9/04
Getting ready to remove lower dash panel - close-up of 1 of the screws. | 
Hits: 2169
Size: 54 KB
Posted: 8/9/04
Must remove the cupholder (2 screws) before removing the lower dash panel. | 
Hits: 2157
Size: 60.94 KB
Posted: 8/9/04
Cupholder removed. |
Hits: 2043
Size: 43.18 KB
Posted: 8/9/04
There are two lower screws that hold in the bottom dash panel that need to be removed as well. | 
Hits: 2130
Size: 56.19 KB
Posted: 8/9/04
2 screws to remove the strange hook/hanger thingy. | 
Hits: 2330
Size: 58.54 KB
Posted: 8/9/04
Lower dash panel removed (don't forget to unplug the cigarette lighter before full removal). | 
Hits: 2388
Size: 53.44 KB
Posted: 8/9/04
Antenna cable needed for AM/FM on the new deck. | 
Hits: 2627
Size: 71.51 KB
Posted: 8/9/04
The CVA-1005 brain and its numerous wires. |
Hits: 2345
Size: 78.18 KB
Posted: 8/9/04
Splicing the yellow, red, and black wires together. | 
Hits: 2367
Size: 69.05 KB
Posted: 8/9/04
Removing the CVA-1005. | 
Hits: 3924
Size: 59.71 KB
Posted: 8/9/04
Rear view of the CDA-9827. | 
Hits: 2498
Size: 79.28 KB
Posted: 8/9/04
CDA-9827 ready for install. | 
Hits: 3800
Size: 53.25 KB
Posted: 8/9/04
CVA-1005 and CDA-9827 being pushed into place. |
Hits: 2241
Size: 44.36 KB
Posted: 8/9/04
Locating the mounting holes. | 
Hits: 2413
Size: 60.36 KB
Posted: 8/9/04
Securing the CDA-9827 and CVA-1005 together. | 
Hits: 2252
Size: 60.54 KB
Posted: 8/9/04
Securing the units into place to the dash. | 
Hits: 2535
Size: 59.78 KB
Posted: 8/9/04
Installed w/o dash. | 
Hits: 2408
Size: 49.92 KB
Posted: 8/9/04
Installed w/ dash. |
Hits: 2203
Size: 34.42 KB
Posted: 8/9/04
Night shot w/ CVA-1005 closed. | 
Hits: 2650
Size: 33.19 KB
Posted: 8/9/04
Night shot w/ CVA-1005 open. | | | |
Alpine CDA-9827 Install