|
|
Hits: 10355
Size: 65.81 KB
Posted: 2/7/05
The red arrow indicates where the stock, rubber vacuum lines connect. The ends of mine were brittle... | 
Hits: 7644
Size: 50.68 KB
Posted: 2/7/05
This is the yellow o-ring that seals the hub. Replacement is easy, it simply fits around the outsid... | 
Hits: 10829
Size: 1.89 MB
Posted: 9/26/05
2-part video that shows a loose lower ball joint installed and removed.
Part 1 of the video shows... | 
Hits: 7476
Size: 652.63 KB
Posted: 12/16/05
This video clip shows how to remove the hub from a Dana 50 frontend off of an Excursion. This also a... | 
Hits: 6776
Size: 675.74 KB
Posted: 9/11/06
Removing the retaining/c-clip from the hub. |
Hits: 7078
Size: 990.82 KB
Posted: 9/11/06
Removing the hub from the dana 50 front axle. | 
Hits: 6348
Size: 1.54 MB
Posted: 9/11/06
Remove axle c-clip from dana 50 front axle. | 
Hits: 6135
Size: 655.33 KB
Posted: 9/11/06
Remove the 3 washers from the dana 50 front axle. | 
Hits: 5780
Size: 5.3 MB
Posted: 9/11/06
Removing the drag link from the front end. | 
Hits: 6544
Size: 1.52 MB
Posted: 9/11/06
Loosen the bolts behind the lug lugs the dana 50 (this is the hub assembly, which includes your bear... |
Hits: 5406
Size: 2.33 MB
Posted: 9/11/06
Unbolt the electronic shift on-the-fly (ESOF) line. | 
Hits: 5701
Size: 1.81 MB
Posted: 9/11/06
Unbolt the anti-lock brake sensor (ABS). | 
Hits: 6074
Size: 4.45 MB
Posted: 9/11/06
Tap and pry loose the lug plate. | 
Hits: 5490
Size: 850.29 KB
Posted: 9/11/06
Remove the knuckle/axle washer. Note the grooves face in towards the differential. | 
Hits: 5230
Size: 1.92 MB
Posted: 9/11/06
Disconnect the electronic shift on-the-fly (ESOF) vacuum line. |
Hits: 6727
Size: 4.33 MB
Posted: 9/11/06
Pry loose and remove axle shaft. | 
Hits: 5410
Size: 4.44 MB
Posted: 9/11/06
Remove cotter pin from the knuckle. | 
Hits: 5550
Size: 5.74 MB
Posted: 9/11/06
Unbolt the steering knuckle. | 
Hits: 5060
Size: 2.68 MB
Posted: 9/11/06
Remove the c-clip from the steering knuckle. | 
Hits: 6006
Size: 1.22 MB
Posted: 9/11/06
Remove the lower ball joint with a BFH. |
Hits: 6654
Size: 3.49 MB
Posted: 9/11/06
Remove the upper ball joint with the proper ball joint removal tool and air tools! | 
Hits: 6191
Size: 2.29 MB
Posted: 9/11/06
Using the ball joint press and air tools, install the new ball joints. This process is fairly straig... | 
Hits: 6065
Size: 2.52 MB
Posted: 9/11/06
Remove and install the new inner axle seal. (Outer axle seal should be pressed in by a shop or deale... | 
Hits: 6004
Size: 7.6 MB
Posted: 9/11/06
Reinstall the steering knuckle. | 
Hits: 6705
Size: 3.34 MB
Posted: 9/11/06
Reinstall the axle shaft. |
Hits: 5468
Size: 10.47 MB
Posted: 9/11/06
Reinstall lug plate, hoses, and lines. | 
Hits: 6170
Size: 8.03 MB
Posted: 9/11/06
Reinstall hub assembly and seal. | 
Hits: 5432
Size: 3.65 MB
Posted: 9/11/06
Reinstall drag link. | 
Hits: 5410
Size: 5.37 MB
Posted: 9/11/06
Reinstall brakes. | |
Ball Joint Replacement