I had a lot of play in the front passenger-side wheel and it was due to the bearing in the hub assem...
Hits: 5226
Size: 70 KB
Posted: 1/25/07
I had a lot of play in the front passenger-side wheel and it was due to the bearing in the hub assem...
Brand new Dana 50 hub assembly. Front axle bearings in the Dana 50 are non-serviceable, so when the ...
Hits: 4393
Size: 78.97 KB
Posted: 1/25/07
Brand new Dana 50 hub assembly. Front axle bearings in the Dana 50 are non-serviceable, so when the ...
Same hub assembly without the plastic plug.
Hits: 3849
Size: 73.47 KB
Posted: 1/25/07
Same hub assembly without the plastic plug.
The old hub assembly. Notice the 4 studs (threaded on each end). The studs feed through the holes in...
Hits: 3931
Size: 80.47 KB
Posted: 1/25/07
The old hub assembly. Notice the 4 studs (threaded on each end). The studs feed through the holes in...

Hits: 3759
Size: 77.46 KB
Posted: 1/25/07
Notice the yellow o-ring (Part # F81Z-4A322-AA ) and how it is shredded. Do not expect to be able to...
Hits: 4353
Size: 94.34 KB
Posted: 1/25/07
Notice the yellow o-ring (Part # F81Z-4A322-AA ) and how it is shredded. Do not expect to be able to...
Close-up of the front passenger knuckle with wheel, caliper, hub assembly, and brake dust shield rem...
Hits: 4744
Size: 72.68 KB
Posted: 1/25/07
Close-up of the front passenger knuckle with wheel, caliper, hub assembly, and brake dust shield rem...
The entire hub assembly swap will take 60-90 minutes and is very straight-forward.

[b]Remove the ...
Hits: 4557
Size: 70.85 KB
Posted: 1/25/07
The entire hub assembly swap will take 60-90 minutes and is very straight-forward. [b]Remove the ...
  

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog