IMG_0060.JPG
413 hits | 45.76 KB | Posted: 8/3/07
This little trick will allow me to utilize the stock Lincoln rubber isolated hangers to support the ...

IMG_0044.JPG
445 hits | 70.17 KB | Posted: 8/3/07
To say it's easy to build would be an understatement. Just bend the 3/8" mild steel rod in the vice ...

IMG_0046.JPG
417 hits | 55.5 KB | Posted: 8/3/07
I bent almost no drop in this one because the Hooker muffler is a little bit thicker than stock and ...

IMG_0047.JPG
496 hits | 58.25 KB | Posted: 8/3/07
Next step, add 2 3/4" muffler clamp...

IMG_0048.JPG
406 hits | 55.58 KB | Posted: 8/3/07
Note the offset on this one. I've already done this once before with a 2 1/4" to 2" GMC (4.3 truck) ...

IMG_0049.JPG
490 hits | 55.78 KB | Posted: 8/3/07
Quick trip to my welding buddy and it's secured for life. (thanks Kevin B)

IMG_0052.JPG
441 hits | 48.01 KB | Posted: 8/3/07
Kevin's welds don't break

IMG_0058.JPG
520 hits | 43 KB | Posted: 8/3/07
This should have no trouble supporting everything while utilizing the stock rubber isolaters for no ...