Steve83 > 1995 Ford F-150 > open folder Junker

What a beauty! All those used tires in the bed WERE in the cab a few minutes ago. Yes, the back wi...
Hits: 2695
Size: 92.79 KB
Posted: 2/11/11
What a beauty! All those used tires in the bed WERE in the cab a few minutes ago. Yes, the back wi...		It was abused & neglected, and driven on 1 tank for a while. When that one died, it was abandoned f...
Hits: 1990
Size: 109.87 KB
Posted: 2/11/11
It was abused & neglected, and driven on 1 tank for a while. When that one died, it was abandoned f...		2 tires off the rims; 2 dead gas tanks; 2 bent bumpers; 2 missing window cranks; 2 undamaged pieces ...
Hits: 2613
Size: 101.97 KB
Posted: 2/11/11
2 tires off the rims; 2 dead gas tanks; 2 bent bumpers; 2 missing window cranks; 2 undamaged pieces ...		Both doors will be replaced, the RHF fender, both bumpers, and the valance between the grille & bump...
Hits: 2227
Size: 110.29 KB
Posted: 2/11/11
Both doors will be replaced, the RHF fender, both bumpers, and the valance between the grille & bump...		The bumper is pretty rough, but I'm gonna straighten it.
Hits: 1806
Size: 76.32 KB
Posted: 2/11/11
The bumper is pretty rough, but I'm gonna straighten it.
A squirrell wintered under the seat - he's been getting in & out through the dislodged shifter cable...
Hits: 1896
Size: 95.41 KB
Posted: 2/11/11
A squirrell wintered under the seat - he's been getting in & out through the dislodged shifter cable...		It looks like birds were roosting on the dash & crapping on the column due to the broken rear window...
Hits: 1856
Size: 89.21 KB
Posted: 2/11/11
It looks like birds were roosting on the dash & crapping on the column due to the broken rear window...		Safety Certification label in driver's door jamb above door latch strike (VIN edited) [url=https://...
Hits: 1833
Size: 71.76 KB
Posted: 2/11/11
Safety Certification label in driver's door jamb above door latch strike (VIN edited) [url=https://...		Calibration label in driver's door jamb
Hits: 1719
Size: 73.84 KB
Posted: 2/11/11
Calibration label in driver's door jamb		EEC calibration code sticker in driver's door jamb Some trucks have this - others don't. Coincid...
Hits: 1863
Size: 72.94 KB
Posted: 2/11/11
EEC calibration code sticker in driver's door jamb Some trucks have this - others don't. Coincid...
VECI Label under hood above master cylinder [url=https://www.supermotors.net/registry/media/858380]...
Hits: 3711
Size: 85.86 KB
Posted: 2/11/11
VECI Label under hood above master cylinder [url=https://www.supermotors.net/registry/media/858380]...		4.9L FEAD belt routing sticker on core support
Hits: 1934
Size: 92.67 KB
Posted: 2/11/11
4.9L FEAD belt routing sticker on core support		Refrigerant label on core support
Hits: 1635
Size: 78.38 KB
Posted: 2/11/11
Refrigerant label on core support		Jacking Instructions sticker on core support [url=https://www.supermotors.net/registry/media/831119...
Hits: 2180
Size: 81.11 KB
Posted: 2/11/11
Jacking Instructions sticker on core support [url=https://www.supermotors.net/registry/media/831119...		Inertia Fuel Shutoff (IFS) switch sticker on core support
Hits: 1557
Size: 89.46 KB
Posted: 2/11/11
Inertia Fuel Shutoff (IFS) switch sticker on core support
The previous owner got as far as bending a tie-rod by hooking a tow chain there, connecting a fuel p...
Hits: 1631
Size: 93.73 KB
Posted: 2/11/11
The previous owner got as far as bending a tie-rod by hooking a tow chain there, connecting a fuel p...		[url=https://www.supermotors.net/registry/media/825935][img]https://www.supermotors.net/getfile/8259...
Hits: 1869
Size: 100.61 KB
Posted: 2/11/11
[url=https://www.supermotors.net/registry/media/825935][img]https://www.supermotors.net/getfile/8259...		The #4 plug wire is off to see that it's sparking. [url=https://www.supermotors.net/registry/media/...
Hits: 1594
Size: 97.95 KB
Posted: 2/11/11
The #4 plug wire is off to see that it's sparking. [url=https://www.supermotors.net/registry/media/...		95A 3G alternator. Note the 4 holes between each pair of front ribs, and that it's attached using t...
Hits: 1517
Size: 90.88 KB
Posted: 2/11/11
95A 3G alternator. Note the 4 holes between each pair of front ribs, and that it's attached using t...		Craptasmic battery, STONE-dead. Terminals destroyed. [url=https://www.supermotors.net/registry/274...
Hits: 1557
Size: 85.81 KB
Posted: 2/11/11
Craptasmic battery, STONE-dead. Terminals destroyed. [url=https://www.supermotors.net/registry/274...
The guy who had it before me used his 4WD tractor to drag it around his yard by the tie rod. [url=h...
Hits: 1722
Size: 104.52 KB
Posted: 2/13/11
The guy who had it before me used his 4WD tractor to drag it around his yard by the tie rod. [url=h...		I didn't realize it was bent badly enough to dig the adjuster bolt into the sidewall, blowing out th...
Hits: 1944
Size: 91.17 KB
Posted: 2/13/11
I didn't realize it was bent badly enough to dig the adjuster bolt into the sidewall, blowing out th...		What a... [url=https://www.supermotors.net/registry/media/440042][img]https://www.supermotors.net/g...
Hits: 1586
Size: 96.93 KB
Posted: 2/13/11
What a... [url=https://www.supermotors.net/registry/media/440042][img]https://www.supermotors.net/g...		Amazing what you can do with a 12# sledge... Coincidentally, that same sledge was necessary to remo...
Hits: 1558
Size: 90.54 KB
Posted: 2/13/11
Amazing what you can do with a 12# sledge... Coincidentally, that same sledge was necessary to remo...		With some creativity (plus 2 fire extinguishers, 2 gallon jugs of water, and a hose nearby), I creat...
Hits: 2029
Size: 95.8 KB
Posted: 2/13/11
With some creativity (plus 2 fire extinguishers, 2 gallon jugs of water, and a hose nearby), I creat...
Temporary fuel system includes fire extinguishers, water jugs, & a garden hose. [url=https://www.su...
Hits: 383
Size: 103.91 KB
Posted: 4/26/18
Temporary fuel system includes fire extinguishers, water jugs, & a garden hose. [url=https://www.su...		I added a low fuel light, just to see how it went in a non-tach cluster. It was a little easier sin...
Hits: 1784
Size: 70.54 KB
Posted: 2/20/11
I added a low fuel light, just to see how it went in a non-tach cluster. It was a little easier sin...		To lift the bed, loosen the clamps (8mm, 5/16") around the filler supports, then slide them out...
Hits: 4082
Size: 73.44 KB
Posted: 2/21/11
To lift the bed, loosen the clamps (8mm, 5/16") around the filler supports, then slide them out...		To lift the bed, remove the filler caps & filler neck screws (5.5mm, 7/32"), then push the neck...
Hits: 2624
Size: 87.85 KB
Posted: 2/21/11
To lift the bed, remove the filler caps & filler neck screws (5.5mm, 7/32"), then push the neck...		To lift the bed, disconnect the taillight wiring forward of the rear bumper. Go to the NEXT pic... ...
Hits: 2559
Size: 81.9 KB
Posted: 2/21/11
To lift the bed, disconnect the taillight wiring forward of the rear bumper. Go to the NEXT pic... ...
To lift the bed, remove the nuts (18mm) for the bed bolts (8 on longbed; 6 on all others). Go to th...
Hits: 2473
Size: 84.84 KB
Posted: 2/21/11
To lift the bed, remove the nuts (18mm) for the bed bolts (8 on longbed; 6 on all others). Go to th...		These bed bolts are in much better condition than I expected, considering how rusty the hubs were. ...
Hits: 2305
Size: 83.27 KB
Posted: 2/21/11
These bed bolts are in much better condition than I expected, considering how rusty the hubs were. ...		To lift the bed for fuel tank access, I used my electric hoist (an ATV winch & some scrap metal). G...
Hits: 3694
Size: 66.17 KB
Posted: 2/21/11
To lift the bed for fuel tank access, I used my electric hoist (an ATV winch & some scrap metal). G...		Easy! Go to the NEXT pic... [url=https://www.supermotors.net/registry/media/471464][img]https://ww...
Hits: 3258
Size: 71.75 KB
Posted: 2/21/11
Easy! Go to the NEXT pic... [url=https://www.supermotors.net/registry/media/471464][img]https://ww...		It'll be much easier to work on the tanks this way, rather than from below. Go to the NEXT pic...
Hits: 2528
Size: 86.27 KB
Posted: 2/21/11
It'll be much easier to work on the tanks this way, rather than from below. Go to the NEXT pic...
I'll vacuum & wash the tanks before opening anything. The unusually large fuel line fitting at the ...
Hits: 2279
Size: 82.94 KB
Posted: 2/21/11
I'll vacuum & wash the tanks before opening anything. The unusually large fuel line fitting at the ...		I'll vacuum & wash the tanks before opening anything. Go to the NEXT pic...
Hits: 2481
Size: 81.59 KB
Posted: 2/21/11
I'll vacuum & wash the tanks before opening anything. Go to the NEXT pic...		Even though I put a safety strap under the suspended bed, I rolled the chassis out to work on the ta...
Hits: 2544
Size: 103.85 KB
Posted: 2/21/11
Even though I put a safety strap under the suspended bed, I rolled the chassis out to work on the ta...		After washing & vacuuming, and a little penetrating oil (NONE on the O-ring), the lock ring can come...
Hits: 2592
Size: 95.37 KB
Posted: 3/29/11
After washing & vacuuming, and a little penetrating oil (NONE on the O-ring), the lock ring can come...		Some force was necessary to break the FDM loose from the bottom of the tank. See the NEXT several p...
Hits: 2321
Size: 91.7 KB
Posted: 3/29/11
Some force was necessary to break the FDM loose from the bottom of the tank. See the NEXT several p...
I can't describe the smell... For more info, read these captions: [url=https://www.supermotors.net...
Hits: 2477
Size: 100.39 KB
Posted: 3/29/11
I can't describe the smell... For more info, read these captions: [url=https://www.supermotors.net...		The back tank was just as bad as the front. 6 years is too long for gas to sit. I burned both tank...
Hits: 2664
Size: 89.21 KB
Posted: 3/29/11
The back tank was just as bad as the front. 6 years is too long for gas to sit. I burned both tank...		After a few weeks' searching, I found a rear tank. It's from a '93, but the only difference is the ...
Hits: 2110
Size: 59.62 KB
Posted: 4/17/11
After a few weeks' searching, I found a rear tank. It's from a '93, but the only difference is the ...		Since I got the pigtail with the '93 tank, and I saved the original '95 pump plate, it was easy to m...
Hits: 4423
Size: 85.41 KB
Posted: 4/17/11
Since I got the pigtail with the '93 tank, and I saved the original '95 pump plate, it was easy to m...		To temporarily (or indefinitely) run any '90-96 dual-tank truck on 1 tank, it's necessary to plug bo...
Hits: 11365
Size: 74.81 KB
Posted: 4/17/11
To temporarily (or indefinitely) run any '90-96 dual-tank truck on 1 tank, it's necessary to plug bo...
Today, I found a decent front tank & pump - only a little dent near the front.
Hits: 2036
Size: 44.47 KB
Posted: 4/19/11
Today, I found a decent front tank & pump - only a little dent near the front.		The motor spins, and I rebuilt the sender, which now produces a smooth signal. After it's installed...
Hits: 2149
Size: 93.33 KB
Posted: 4/19/11
The motor spins, and I rebuilt the sender, which now produces a smooth signal. After it's installed...		It works! For more info, read these captions: [url=https://www.supermotors.net/registry/2742/12737...
Hits: 2010
Size: 88.59 KB
Posted: 4/19/11
It works! For more info, read these captions: [url=https://www.supermotors.net/registry/2742/12737...		Now that there are 2 working tanks, I can drop the bed back on. For more info, read these captions:...
Hits: 1988
Size: 99.39 KB
Posted: 4/19/11
Now that there are 2 working tanks, I can drop the bed back on. For more info, read these captions:...		It's much cleaner than I expected.
Hits: 2040
Size: 84.31 KB
Posted: 2/21/11
It's much cleaner than I expected.
I think that rocker panel is the only damage to the cab.
Hits: 2126
Size: 92.26 KB
Posted: 2/21/11
I think that rocker panel is the only damage to the cab.		These rubber plugs are for the cab resonance weight. I haven't found any pattern to which trucks go...
Hits: 2216
Size: 56.52 KB
Posted: 2/21/11
These rubber plugs are for the cab resonance weight. I haven't found any pattern to which trucks go...		I've only had this for ~10 years - it's about time it got used on something. The "E3..." ...
Hits: 1930
Size: 86.3 KB
Posted: 3/29/11
I've only had this for ~10 years - it's about time it got used on something. The "E3..." ...		That's where it belongs... See the PREVious 2 pics.
Hits: 1862
Size: 82.94 KB
Posted: 3/29/11
That's where it belongs... See the PREVious 2 pics.		The first few blasts drained out nearly opaque brown - I think someone must have spilled a LOT of co...
Hits: 2673
Size: 91.54 KB
Posted: 3/29/11
The first few blasts drained out nearly opaque brown - I think someone must have spilled a LOT of co...
The seat cover, seatback, seat belts, & rear carpet got hosed out & sun-dried. The headrest covers ...
Hits: 2206
Size: 105.87 KB
Posted: 3/29/11
The seat cover, seatback, seat belts, & rear carpet got hosed out & sun-dried. The headrest covers ...		The floor cover, floor-mounted belts, & rear carpet got hosed off, sun-dried, and treated with Lysol...
Hits: 2013
Size: 84.2 KB
Posted: 3/29/11
The floor cover, floor-mounted belts, & rear carpet got hosed off, sun-dried, and treated with Lysol...		I sanded & painted the shifter, and reinstalled the knob.
Hits: 1818
Size: 76.07 KB
Posted: 4/9/11
I sanded & painted the shifter, and reinstalled the knob.		The windshield side & lower trim were packed with leaves. While it was off, I removed the wiper val...
Hits: 5134
Size: 96.21 KB
Posted: 4/9/11
The windshield side & lower trim were packed with leaves. While it was off, I removed the wiper val...		It took a few hours with some BP hammers, prybars, & wood blocks, but it's pretty close to its origi...
Hits: 3100
Size: 67.77 KB
Posted: 4/14/11
It took a few hours with some BP hammers, prybars, & wood blocks, but it's pretty close to its origi...
It almost looks like a truck again. The painter says he'll get to my doors, fender, & valance tomor...
Hits: 1741
Size: 98.9 KB
Posted: 4/20/11
It almost looks like a truck again. The painter says he'll get to my doors, fender, & valance tomor...		I've already straightened the reinforcing plate behind the headlight opening, but the core support i...
Hits: 1921
Size: 104.59 KB
Posted: 3/29/11
I've already straightened the reinforcing plate behind the headlight opening, but the core support i...		I've only had a spare R fender for ~5 years, and it's almost the right color. [url=https://www.supe...
Hits: 1872
Size: 97.6 KB
Posted: 3/29/11
I've only had a spare R fender for ~5 years, and it's almost the right color. [url=https://www.supe...		It was probably the same squirrel who lived in the '93 Bronco who knew how to get in through the cow...
Hits: 1664
Size: 87.64 KB
Posted: 3/29/11
It was probably the same squirrel who lived in the '93 Bronco who knew how to get in through the cow...		This '93 Bronco door is MX (Dark Shadow Blue Metallic), which isn't quite as purple as this truck's ...
Hits: 1631
Size: 82.57 KB
Posted: 3/29/11
This '93 Bronco door is MX (Dark Shadow Blue Metallic), which isn't quite as purple as this truck's ...
Again: a big improvement. [url=https://www.supermotors.net/registry/media/850897][img]https://www.s...
Hits: 1721
Size: 53.41 KB
Posted: 4/14/11
Again: a big improvement. [url=https://www.supermotors.net/registry/media/850897][img]https://www.s...		I picked up the painted parts yesterday, so I can finally remove the bad doors. Unfortunately, the ...
Hits: 1551
Size: 84.25 KB
Posted: 5/5/11
I picked up the painted parts yesterday, so I can finally remove the bad doors. Unfortunately, the ...		About what you'd expect. The gasket has been smashed by the misaligned door for so long that it doe...
Hits: 1529
Size: 95.96 KB
Posted: 5/5/11
About what you'd expect. The gasket has been smashed by the misaligned door for so long that it doe...		I'd have gotten this fender on much faster if I hadn't had to change the voltage regulator, pull the...
Hits: 1511
Size: 111.03 KB
Posted: 5/5/11
I'd have gotten this fender on much faster if I hadn't had to change the voltage regulator, pull the...		As usual, I'm painting at night. But it seems to be working OK - the other vehicles still look dece...
Hits: 1353
Size: 79.44 KB
Posted: 5/5/11
As usual, I'm painting at night. But it seems to be working OK - the other vehicles still look dece...
Pretty good for spray painting in the dark on dirt with no prep. Now I just need some pinstriping.
Hits: 1383
Size: 81.48 KB
Posted: 5/5/11
Pretty good for spray painting in the dark on dirt with no prep. Now I just need some pinstriping.		I wasn't planning to wash it for a week after I finished painting, but since a storm blew through la...
Hits: 1494
Size: 104.48 KB
Posted: 5/7/11
I wasn't planning to wash it for a week after I finished painting, but since a storm blew through la...		Under all the sap, mildew, & grime, it's not as bad as I thought.
Hits: 1525
Size: 57.1 KB
Posted: 5/7/11
Under all the sap, mildew, & grime, it's not as bad as I thought.		I still have to touch up the tailgate, bed corner, & a few other spots, and paint on the pinstripes....
Hits: 1424
Size: 63.28 KB
Posted: 5/7/11
I still have to touch up the tailgate, bed corner, & a few other spots, and paint on the pinstripes....		I still have to touch up the tailgate & a few other spots, and paint on the pinstripes. But the bum...
Hits: 1358
Size: 104.91 KB
Posted: 5/7/11
I still have to touch up the tailgate & a few other spots, and paint on the pinstripes. But the bum...
You'd never guess what it looked like 3 months ago, so here's a reminder: [url=https://www.supermot...
Hits: 1426
Size: 97.41 KB
Posted: 5/7/11
You'd never guess what it looked like 3 months ago, so here's a reminder: [url=https://www.supermot...		I've never seen this before - it looks like someone went along the heater hose with a needle punchin...
Hits: 1747
Size: 46.26 KB
Posted: 4/17/11
I've never seen this before - it looks like someone went along the heater hose with a needle punchin...		After a little driving, it became apparent that there was a serious oil leak dripping onto the rear ...
Hits: 3632
Size: 99.2 KB
Posted: 5/10/11
After a little driving, it became apparent that there was a serious oil leak dripping onto the rear ...		This is after removing the throttle cover, the PCV & breather hose from their grommets, all the vacu...
Hits: 2717
Size: 109.19 KB
Posted: 5/10/11
This is after removing the throttle cover, the PCV & breather hose from their grommets, all the vacu...		The main leak is the big GAP almost halfway down on the R side (LEFT in the pic) just this side of t...
Hits: 1879
Size: 72.16 KB
Posted: 5/10/11
The main leak is the big GAP almost halfway down on the R side (LEFT in the pic) just this side of t...
After a couple of long drives, I dumped & refilled the transmission, and cleaned the magnet. Fillin...
Hits: 2237
Size: 90.07 KB
Posted: 5/13/11
After a couple of long drives, I dumped & refilled the transmission, and cleaned the magnet. Fillin...		It looks normal again, and I'm driving it whenever I can. [url=https://www.supermotors.net/registry...
Hits: 1501
Size: 88.59 KB
Posted: 5/13/11
It looks normal again, and I'm driving it whenever I can. [url=https://www.supermotors.net/registry...		I rebuilt the MFS today, so everything is working now. [url=https://www.supermotors.net/registry/me...
Hits: 2121
Size: 88.11 KB
Posted: 5/13/11
I rebuilt the MFS today, so everything is working now. [url=https://www.supermotors.net/registry/me...		Clean enough to sit on, which is saying a lot, considering how bad it was. [url=https://www.supermo...
Hits: 1700
Size: 56.48 KB
Posted: 5/13/11
Clean enough to sit on, which is saying a lot, considering how bad it was. [url=https://www.supermo...		The dash clunked every time I hit a bump, so I tracked down & installed one of the few remaining rep...
Hits: 1710
Size: 81.69 KB
Posted: 5/18/11
The dash clunked every time I hit a bump, so I tracked down & installed one of the few remaining rep...
This corner looks even better after some paint. [url=https://www.supermotors.net/registry/media/862...
Hits: 1529
Size: 73.76 KB
Posted: 5/13/11
This corner looks even better after some paint. [url=https://www.supermotors.net/registry/media/862...		I found some black center caps in my junkpile which are correct, but rare. I'd rather put red ones ...
Hits: 1673
Size: 100.75 KB
Posted: 5/13/11
I found some black center caps in my junkpile which are correct, but rare. I'd rather put red ones ...		I finally found another chrome rim for the RHR, and the bumper is a lot straighter than it used to b...
Hits: 1801
Size: 70.87 KB
Posted: 5/27/11
I finally found another chrome rim for the RHR, and the bumper is a lot straighter than it used to b...		I finally found another chrome rim for the RHR.
Hits: 2641
Size: 65.37 KB
Posted: 5/27/11
I finally found another chrome rim for the RHR.		The torn L engine mount is another part of the vibration during acceleration... [url=https://www.su...
Hits: 1920
Size: 86.98 KB
Posted: 6/3/11
The torn L engine mount is another part of the vibration during acceleration... [url=https://www.su...
The torn L engine mount is another part of the vibration during acceleration... [url=https://www.su...
Hits: 1797
Size: 87.79 KB
Posted: 6/3/11
The torn L engine mount is another part of the vibration during acceleration... [url=https://www.su...		The torn L engine mount is another part of the vibration during acceleration... I have the engine l...
Hits: 1708
Size: 78.13 KB
Posted: 6/3/11
The torn L engine mount is another part of the vibration during acceleration... I have the engine l...		The torn R engine mount is YET another part of the vibration during acceleration... [url=https://ww...
Hits: 1833
Size: 94.88 KB
Posted: 6/3/11
The torn R engine mount is YET another part of the vibration during acceleration... [url=https://ww...		These were another part of the vibration during acceleration... It has been significantly reduced a...
Hits: 2707
Size: 125.61 KB
Posted: 6/3/11
These were another part of the vibration during acceleration... It has been significantly reduced a...		Frank bought it a month ago, and it's finally back for one more front fuel pump. For more info, rea...
Hits: 2178
Size: 106.34 KB
Posted: 7/10/11
Frank bought it a month ago, and it's finally back for one more front fuel pump. For more info, rea...
This 2WD Mazda M5OD-R2 output shaft gave no sign of damage before letting go while driving at very l...
Hits: 933
Size: 53.42 KB
Posted: 3/9/16
This 2WD Mazda M5OD-R2 output shaft gave no sign of damage before letting go while driving at very l...		The ADM has been screeching intermittently, and it stunk. It has apparently been trying to burn its...
Hits: 654
Size: 71.55 KB
Posted: 4/24/18
The ADM has been screeching intermittently, and it stunk. It has apparently been trying to burn its...		Before & After
Hits: 75
Size: 41.45 KB
Posted: 7/4/21
Before & After		  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog