IMG_20190127_151430773.jpg
131 hits | 95.49 KB | Posted: 2/11/19
I got antsy and threw the fiberglass pieces on and it looks oh so much better. Cutting off the massive swim platform front bumper helped, too.

IMG_20190127_114330082_HDR.jpg
128 hits | 102.98 KB | Posted: 2/11/19
Most fasteners had to be cut off to get the front clip off. The core support and inner fenders are bad enough that I'm considering cutting all that out and building a tubular core support and adding inner fenders later.

IMG_20190118_131731322.jpg
129 hits | 87.99 KB | Posted: 2/11/19
Identical second row center seats from two different 04-ish Expeditions. Paid $35 out the gate at Pick-n-Pull for the pair. Not the sexiest things but the integrated shoulder belts are helpful and they fold flat when the boys aren't with me.

IMG_20180503_090824278.jpg
126 hits | 129.55 KB | Posted: 2/11/19
Dana 60 from a 2005 F250 I bought from the Bronco seller. Pure beef and just gigantic. Won't even fit between the trailer rails so I'll have to cut it down before it can end up under this Bronco but I scored a Dana 44 that will work for now.

IMG_20181224_150120558.jpg
143 hits | 95.98 KB | Posted: 2/11/19
Lot I scored for $300: 74 Dana 44 drum axle disassembled, blasted, and painted. Also, big bearing 9" housing, case, and axles and some mystery leaf springs. I have GM disc parts collected already for the front. Knuckles came painted red so in...

IMG_20181229_210631626.jpg
139 hits | 66.38 KB | Posted: 2/11/19
mystery leaf springs that came with Dana 44 purchase.

IMG_20180518_155330037.jpg
213 hits | 127.66 KB | Posted: 7/7/18
Paid $500 for this running/driving early 97 Explorer 5.0 AWD. After selling the rear axle and scrapping the rest, I have a nice mass air EFI GT40 engine and overdrive automatic for about $75.

IMG_20180418_180659886_BURST000_COVER_TOP.jpg
208 hits | 117.87 KB | Posted: 7/7/18
Originally an inline 6, swapped to an 80 model 302 of some sort. Mounts are collapsed and the crank pulley is resting on the cross member.

IMG_20180418_105030663.jpg
192 hits | 116.16 KB | Posted: 7/7/18
Pile of parts inside the Bronco, including the entire front axle disassembled.

IMG_20180504_102147063.jpg
595 hits | 117.98 KB | Posted: 7/7/18
After getting the front axle back under it and some Alcoa's and 32" BFG's installed so it can roll into the shop for an overhaul

IMG_20180418_120419360.jpg
217 hits | 157.04 KB | Posted: 7/7/18
Loaded up with an 05 F250 Dana 60, about to head back from Memphis to Little Rock

IMG_20180518_155330037.jpg
213 hits | 127.66 KB | Posted: 7/7/18
Paid $500 for this running/driving early 97 Explorer 5.0 AWD. After selling the rear axle and scrapping the rest, I have a nice mass air EFI GT40 engine and overdrive automatic for about $75.

IMG_20180418_180659886_BURST000_COVER_TOP.jpg
208 hits | 117.87 KB | Posted: 7/7/18
Originally an inline 6, swapped to an 80 model 302 of some sort. Mounts are collapsed and the crank pulley is resting on the cross member.

IMG_20180418_105030663.jpg
192 hits | 116.16 KB | Posted: 7/7/18
Pile of parts inside the Bronco, including the entire front axle disassembled.

IMG_20181224_150120558.jpg
143 hits | 95.98 KB | Posted: 2/11/19
Lot I scored for $300: 74 Dana 44 drum axle disassembled, blasted, and painted. Also, big bearing 9" housing, case, and axles and some mystery leaf springs. I have GM disc parts collected already for the front. Knuckles came painted red so in...

IMG_20181229_210631626.jpg
139 hits | 66.38 KB | Posted: 2/11/19
mystery leaf springs that came with Dana 44 purchase.

IMG_20190127_151430773.jpg
131 hits | 95.49 KB | Posted: 2/11/19
I got antsy and threw the fiberglass pieces on and it looks oh so much better. Cutting off the massive swim platform front bumper helped, too.

IMG_20190118_131731322.jpg
129 hits | 87.99 KB | Posted: 2/11/19
Identical second row center seats from two different 04-ish Expeditions. Paid $35 out the gate at Pick-n-Pull for the pair. Not the sexiest things but the integrated shoulder belts are helpful and they fold flat when the boys aren't with me.