aquartlow > 1979 Ford Ranchero > open folder ranchero 79 > crown-vic-front-brake-assembly-to-ranchero-spi.jpg

File 3 of 353
Prev | Next

Share This
Url
Tag
Img
Thumb

crown-vic-front-brake-assembly-to-ranchero-spi.jpg This shows the Crown Vic front brake assembly and how it mounts and looks on Ranchero. This is as close to vertical the caliper can mount, bleeder is in correct location. I just need to finalize brake hose length or change front hard lines to accept OEM Crown Vic hoses. Ranchero is 7/16x24 whereas the CV hoses are 10mm. Finally found a stock type front brake hose for replacement purposes. A front brake hose from a '98 Ford F150 works well, still has metric female inlet but used a metric to SAE adapter(Carquest). The other end has the required banjo for the Crown Vic caliper.
crown-vic-front-brake-assembly-to-ranchero-spi.jpg | Hits: 1285 | Posted on: 8/20/10 | View original size (1.43 MB)

This shows the Crown Vic front brake assembly and how it mounts and looks on Ranchero. This is as close to vertical the caliper can mount, bleeder is in correct location. I just need to finalize brake hose length or change front hard lines to accept OEM Crown Vic hoses. Ranchero is 7/16x24 whereas the CV hoses are 10mm. Finally found a stock type front brake hose for replacement purposes. A front brake hose from a '98 Ford F150 works well, still has metric female inlet but used a metric to SAE adapter(Carquest). The other end has the required banjo for the Crown Vic caliper.