bmw z3 1.jpg
862 hits | 59.68 KB | Posted: 6/23/05
(Posted in: driveway pics)

bmw z3 2.jpg
771 hits | 14.68 KB | Posted: 6/23/05
(Posted in: driveway pics)

bmw z3 3.jpg
832 hits | 52.13 KB | Posted: 6/23/05
(Posted in: driveway pics)

bmw z3 4.jpg
834 hits | 57.82 KB | Posted: 6/23/05
(Posted in: driveway pics)

bmw z3 5.jpg
769 hits | 42.15 KB | Posted: 6/23/05
(Posted in: driveway pics)

07_01_06_1838.jpg
981 hits | 59 KB | Posted: 7/4/06
clear corner and side marker lights, still need the bumper lights. pretty dirty, needs a wash
(Posted in: Z3)

07_03_06_1250.jpg
793 hits | 48.13 KB | Posted: 7/4/06
trunk is de-badged except for the roundel, Remus exhaust and clear corner lights
(Posted in: Z3)

07_01_06_1832.jpg
735 hits | 56.41 KB | Posted: 7/4/06
early production date with the battery under the hood
(Posted in: Z3)

07_01_06_1824.jpg
919 hits | 46.82 KB | Posted: 7/4/06
auxilliary fuel pressure regulator, stock fuel regulator and boost sensing switch for vapor injection
(Posted in: 1.9 16v)

wiredremote.jpg
1150 hits | 45.55 KB | Posted: 8/17/06
adjustable level, frequency cut-in and phase
(Posted in: system)

emptybox.jpg
854 hits | 49.55 KB | Posted: 8/17/06
the backside. what to do with all this space, maybe some speakers mounted in the cover?
(Posted in: system)

boost.jpg
975 hits | 37.19 KB | Posted: 9/3/06
(Posted in: Z3)

11_09_06_1649.jpg
880 hits | 40.57 KB | Posted: 11/11/06
(Posted in: Z3)

11_09_06_1651.jpg
718 hits | 38.96 KB | Posted: 11/11/06
(Posted in: Z3)

11_09_06_1652.jpg
692 hits | 35.93 KB | Posted: 11/11/06
(Posted in: Z3)

11_09_06_1653.jpg
670 hits | 43.16 KB | Posted: 11/11/06
(Posted in: Z3)

11_09_06_1654.jpg
688 hits | 44.47 KB | Posted: 11/11/06
Remus exhaust tip
(Posted in: Z3)

11_09_06_1655.jpg
633 hits | 35.86 KB | Posted: 11/11/06
(Posted in: Z3)

11_09_06_1656.jpg
720 hits | 30.85 KB | Posted: 11/11/06
(Posted in: Z3)

11_09_06_1658.jpg
729 hits | 40.61 KB | Posted: 11/11/06
(Posted in: Z3)

11_09_06_1659.jpg
726 hits | 37.46 KB | Posted: 11/11/06
(Posted in: Z3)

11_09_06_1700.jpg
1041 hits | 56.11 KB | Posted: 11/11/06
(Posted in: Z3)

gaskets101.jpg
942 hits | 73.04 KB | Posted: 6/1/09
making gaskets for the bypass, intake elbow and blower to manifold. material is Fel Pro 'Pro-Ramic' 2499 with a perforated steel core
(Posted in: intake reseal)

gaskets102.jpg
728 hits | 71.74 KB | Posted: 6/2/09
(Posted in: intake reseal)

RotorsCase.jpg
809 hits | 47.95 KB | Posted: 6/2/09
ready re-assemble with Lucas Sticky Red synthetic grease in the needle bearings, and a little dab more on the ends of the shafts to fill 'em up
(Posted in: intake reseal)

filling.jpg
606 hits | 60.66 KB | Posted: 6/2/09
back together and filling with synthetic supercharger oil, i used about 6oz
(Posted in: intake reseal)

IntakePort.jpg
591 hits | 41.61 KB | Posted: 6/2/09
the ends of the rotor lobes through the intake port
(Posted in: intake reseal)

IntakeElbow.jpg
602 hits | 57.35 KB | Posted: 6/2/09
intake elbow installed with a little Permatex Red 'Hylomar' anerobic sealant on my homemade gasket
(Posted in: intake reseal)

CuppedFlange.jpg
608 hits | 48.09 KB | Posted: 6/2/09
blower mounting flange is not flat, a little rub with a file shows the high and low areas
(Posted in: intake reseal)

LowSpot.jpg
596 hits | 51.43 KB | Posted: 6/2/09
some more rubbing with the file shows the lowest spot, could've been the problem?
(Posted in: intake reseal)

CallitFlat.jpg
688 hits | 56.94 KB | Posted: 6/2/09
hopefully the blower flange and the bypass valve mounting surface are flat enough to seal now
(Posted in: intake reseal)

butterflyLoose.jpg
632 hits | 43.67 KB | Posted: 6/3/09
luckily i noticed that the screws holding the butterfly were loose before mounting the bypass
(Posted in: intake reseal)

CuttingReliefs.jpg
669 hits | 39.42 KB | Posted: 6/3/09
on cue, i stripped a bypass mount screw, so i had to drill / tap the holes oversize. the holes in the bypass had to also be drilled oversize, and clearanced for the larger diameter screw heads
(Posted in: intake reseal)

assembled.jpg
676 hits | 63.4 KB | Posted: 6/3/09
back together and ready to mount back on the engine
(Posted in: intake reseal)

gimmebackmyblower.jpg
653 hits | 56.06 KB | Posted: 6/3/09
ready for it
(Posted in: intake reseal)

3rdBulbLit.jpg
579 hits | 42.75 KB | Posted: 6/14/09
i joined the 2 original power wire pairs together and tapped all 3 bulbs off the 2, so the added draw and dimmer control would be more even, we'll see...
(Posted in: console restoration)

3rdBulbIn.jpg
538 hits | 43.59 KB | Posted: 6/14/09
i added an extra bulb to the climate control housing, the left side is dark with no bulb
(Posted in: console restoration)

busted.jpg
558 hits | 46.29 KB | Posted: 6/14/09
thanks to the cretin that broke a window and trashed my console for a cheap radio
(Posted in: console restoration)

BlauWires.jpg
588 hits | 52.38 KB | Posted: 6/17/09
it might not look like much but it was a lot of work.
(Posted in: console restoration)

BlauBahamas.jpg
513 hits | 55.35 KB | Posted: 6/17/09
cheaper radio, NIB $55! install T&M was more than the unit by far.
(Posted in: console restoration)

before.jpg
1005 hits | 33.9 KB | Posted: 7/4/06
stock naturally aspirated
(Posted in: 1.9 16v)

BKR6EK.jpg
871 hits | 9.07 KB | Posted: 1/20/08
NGK BKR6EK has dual grounds for maximum dependability, original set went over 90k. semi-surface gap design is self cleaning
(Posted in: 1.9 16v)

lowergrill.jpg
552 hits | 43.46 KB | Posted: 6/29/09
a little kraut
(Posted in: Z3)

7_06_09.jpg
491 hits | 60.43 KB | Posted: 7/6/09
(Posted in: Z3)

windowold.jpg
514 hits | 37.66 KB | Posted: 7/11/09
don't let this happen to you. i didn't mind the 'tint' until it started cracking
(Posted in: Z3)