 Cats-.JPG
758 hits | 60.27 KB | Posted: 7/17/03
Original 2nd Cat to New High Flow Cat. Notice how new cat has a longer element inside.
(Posted in: Reinhart Exhaust)
 StockCat.JPG
800 hits | 57.8 KB | Posted: 7/17/03
What the stock logs exited to
(Posted in: Reinhart Exhaust)
 NewCat.JPG
1115 hits | 66.21 KB | Posted: 7/17/03
What the new headers exit to. Notice how there is much more room for a sudden ruch of gasses.
(Posted in: Reinhart Exhaust)
 ExhaustInstall01.JPG
777 hits | 66.99 KB | Posted: 7/17/03
Fitting the new exhaust to the stock. All forward of the H-pipe is new.
(Posted in: Reinhart Exhaust)
 LHHeader.JPG
812 hits | 60.59 KB | Posted: 7/17/03
Driver side shorty header installed with stage 8 bolts.
(Posted in: Reinhart Exhaust)
 CamsPI&NPI LH2-.JPG
798 hits | 55.33 KB | Posted: 7/17/03
non PI vs PI cam profile shot
(Posted in: Cams)
 MidSwap.JPG
764 hits | 123.37 KB | Posted: 7/17/03
Mid swap pic. Had to pull airbox from firewall to get room w/o discharging a/c system.
(Posted in: Cams)
 RoomLH.JPG
763 hits | 112.24 KB | Posted: 7/17/03
Room for R&R on passenger side
(Posted in: Cams)
 RoomRH.JPG
864 hits | 126.75 KB | Posted: 7/17/03
Room for R&R on driver side
(Posted in: Cams)
 Compressed.jpg
771 hits | 47.55 KB | Posted: 7/17/03
Pics of springs at full compression. There was room for a think paperclip in one and a thin paperclip in the other. No binding.
(Posted in: Cams)
 TimingChains.JPG
812 hits | 131.29 KB | Posted: 7/17/03
Timing chains
(Posted in: Cams)
 SspringGoingIn.JPG
844 hits | 86.18 KB | Posted: 7/17/03
Inserting the F-150 S spring into the Trac Lock. This has 2 extra clutches and all shims removed.
(Posted in: General)
 Hitch04-.jpg
1312 hits | 56.02 KB | Posted: 7/17/03
Reese Class II shadow mount to standard square Class II custom adapter for Draw-Tite cargo carrier basket.
(Posted in: General)
 CargoCarry04-.JPG
904 hits | 53.02 KB | Posted: 7/17/03
Draw-Tite cargo carrier basket. For those days you need a little more room. And if the load is large, I use trailer lights on it (not shown)
(Posted in: General)
 TracLok02.JPG
827 hits | 92.46 KB | Posted: 3/13/04
Used TracLok Carrier
(Posted in: General)
 TracLok03.JPG
858 hits | 39.74 KB | Posted: 3/13/04
Used TracLok parts. Notice clutches and S-Spring are worn out.
(Posted in: General)
 CclipsModified.JPG
784 hits | 15.67 KB | Posted: 3/13/04
Modified the C-Clips to allow installation/removal with the extra 2 clutches installed.
(Posted in: General)
 65to70.JPG
801 hits | 82.28 KB | Posted: 3/13/04
FRPP 70mm TB compared with stock 65mm unit. Outside diameters are the same.
(Posted in: General)
 70on65.JPG
807 hits | 56.08 KB | Posted: 3/13/04
FRPP 70mm TB compared to stock 65mm unit.
(Posted in: General)
 KBDeadPedal02.JPG
1177 hits | 69.56 KB | Posted: 3/13/04
Kenny Brown Dead Pedal Installed.
(Posted in: General)
 KeylessEntryPad01.JPG
711 hits | 38.59 KB | Posted: 3/13/04
My Keyless Entry Number Pad Quit Working. Water had leaked into and corroded it. Had to replace with new unit.
(Posted in: General)
 KeylessEntryPad02-.JPG
760 hits | 29.22 KB | Posted: 3/13/04
Keyless Entry Number Pad Internals.
(Posted in: General)
 FanModuleFail.jpg
671 hits | 40.78 KB | Posted: 3/13/04
The solider joint went bad in my A/C blower circuit. This is mounted inside the airbox. As result my fan would quit blowing all together at times. I resolidered the junction and no more troubles.
(Posted in: General)
 UDComp01.JPG
761 hits | 34.01 KB | Posted: 3/13/04
Steeda underdrive pulleys compared to stock. (Back when I was n/a)
(Posted in: General)
 UDRemovalTools.JPG
802 hits | 39.72 KB | Posted: 3/13/04
Proper removal tools. It took an 1/2" impact 6-point 18mm socket to get the harmonic balancer bolt off with the steeda in place. broke a few tools trying first...
(Posted in: General)
 Heads-.JPG
617 hits | 47.03 KB | Posted: 3/13/04
Rennegade Ported NonPI Heads
Oversized CC Valves
Few Miles of Breakin
(Posted in: Heads)
 IntakePort1.JPG
616 hits | 48.09 KB | Posted: 3/13/04
Rennegade Ported NonPI Heads
*Intake Port CNC'd
*SS Valves
*Bronze Valve Guides
(Posted in: Heads)
 ExhaustPort-.JPG
609 hits | 27.1 KB | Posted: 3/13/04
Rennegade Ported NonPI Head Exhaust Port
(Posted in: Heads)
 ValveSprings-.JPG
674 hits | 58.04 KB | Posted: 3/13/04
Rennegade Ported NonPI Head Valve Springs
(Posted in: Heads)
 2000GMbaseline-.jpg
676 hits | 49.04 KB | Posted: 3/13/04
This is what my car did mostly stock.
Nice torque.
(Posted in: Dyno)
 AED Almost Tuned.jpg
687 hits | 57.35 KB | Posted: 3/13/04
This is a nice looking dyno graph, before pushing the timing.
*Stock NonPI longblock
*PI cams
*AED 6psi Supercharger
*FRPP shorty headers/Reinhart Exhaust
*Marauder Airbox
*ADTR Intake Tube
*FRPP 70mm TB
(Posted in: Dyno)
 AED Tuned & Start.jpg
607 hits | 58.54 KB | Posted: 3/13/04
This is the supplied and tweeked tuning dyno graphs. (TC unlocked in during the pull.)
*Stock NonPI longblock
*PI cams
*AED 6psi Supercharger
*FRPP shorty headers/Reinhart Exhaust
*Marauder Airbox
*ADTR Intake Tube
*FRPP 70mm TB
(Posted in: Dyno)
 JohnEComp.jpg
703 hits | 33.48 KB | Posted: 3/13/04
NA Baseline compared to AED 6psi with PI cams
(Posted in: Dyno)
 JohnESW.JPG
680 hits | 75.25 KB | Posted: 3/13/04
Car on Speedworks Dyno
(Posted in: Dyno)
 GrillCooler03.JPG
557 hits | 22.03 KB | Posted: 3/13/04
This is a BEHR cooler which I made custom fittings to use 3/4" hose and mount in the grill area.
(Posted in: Cooling)
 UnderCoolers02-.JPG
617 hits | 71.58 KB | Posted: 3/13/04
Here is the supplied AED Peracool Cooler on passenger side (1/3) & BEHR cooler (2/3) mounted underside.
(Posted in: Cooling)
 GrillCooler06-.JPG
615 hits | 33.28 KB | Posted: 3/13/04
BEHR Cooler mounted in grill (3/3)
(Posted in: Cooling)
 JohnEEngine05.JPG
618 hits | 65.33 KB | Posted: 3/13/04
Bosch electric coolant pump is mounted behind the degassing tank, sitting on fender well. COOLANT ROUTING: 1)Coolant leaves bottom of the degassing tank. 2)Goes into the pump. 3) Enters lower square BEHR cooler. 4) Enters lower Peracool. 5) Enters u...
(Posted in: Cooling)
 BentHose-.JPG
629 hits | 60.12 KB | Posted: 3/13/04
Kinking trouble with standard hose between pump and tank.
(Posted in: Cooling)
 M4371 HeaterHose-.JPG
645 hits | 26.82 KB | Posted: 3/13/04
Pre-formed Heater Hose I found to rid kinking trouble. (found at AutoZn, M4371) Only need to cut a small portion off to work out.
(Posted in: Cooling)
 M4371 HoseOnPump-.JPG
624 hits | 51.63 KB | Posted: 3/13/04
Pre-formed hose installed.
(Posted in: Cooling)
 GM Stock Engine.jpg
729 hits | 77.2 KB | Posted: 3/13/04
Bone Stock 2000 Engine
(Posted in: Engine)
 NoIntake.JPG
753 hits | 84.26 KB | Posted: 3/13/04
Intake removed, stock shortblock.
(Posted in: Engine)
 JohnEEngine05.JPG
764 hits | 94.31 KB | Posted: 3/13/04
AED on top, Marauder Airbox, ADTR Intake, Bosch Inercooler Pump.
(Posted in: Engine)
 JohnE005.JPG
722 hits | 77 KB | Posted: 3/13/04
AED on top, Marauder Airbox, ADTR Intake, Bosch Inercooler Pump.
(Posted in: Engine)
|
