Rafael Esqueda > 1995 Ford Bronco > open folder Full Cage

Started off by welding some 1/4" thick plates where the cage points would be. It has a nut welded to...
Hits: 1415
Size: 59.18 KB
Posted: 4/12/04
Started off by welding some 1/4" thick plates where the cage points would be. It has a nut welded to...		shows the points on the body. same on the other side.
Hits: 1341
Size: 54.95 KB
Posted: 4/12/04
shows the points on the body. same on the other side.		Didnt have much help so i used whatever i could to mock things up..
Hits: 1440
Size: 55.33 KB
Posted: 4/12/04
Didnt have much help so i used whatever i could to mock things up.. 		This was some of the first setup i had for the rear.. I added more to it but later changed the desig...
Hits: 1414
Size: 59.02 KB
Posted: 4/12/04
This was some of the first setup i had for the rear.. I added more to it but later changed the desig...		the front cage. i wanted to be able to use my visors with the cage so i designed it around that.
Hits: 1492
Size: 57.07 KB
Posted: 4/12/04
the front cage. i wanted to be able to use my visors with the cage so i designed it around that.
Worked on the spreaders. Wanted to keep the dome light so i worked in that 180* bend.
Hits: 1483
Size: 46.91 KB
Posted: 4/12/04
Worked on the spreaders. Wanted to keep the dome light so i worked in that 180* bend.		triangulated the spreaders and gave them a slight bend to get them closer to the roof.. Contrary to ...
Hits: 1455
Size: 35.4 KB
Posted: 4/12/04
triangulated the spreaders and gave them a slight bend to get them closer to the roof.. Contrary to ...		shows the rear half and the seat belt mounts welded to the cage.
Hits: 1577
Size: 65.36 KB
Posted: 4/12/04
shows the rear half and the seat belt mounts welded to the cage.		1/2" Grade 8 bolt welded to the cage for the upper seatbelt mount.
Hits: 1447
Size: 40.37 KB
Posted: 4/12/04
1/2" Grade 8 bolt welded to the cage for the upper seatbelt mount. 		I designed the cage in 2 main pieces so that i could remove it, weld it up, paint it, slap it back o...
Hits: 1488
Size: 62.19 KB
Posted: 4/12/04
I designed the cage in 2 main pieces so that i could remove it, weld it up, paint it, slap it back o...
front half of the cage coming out.
Hits: 1444
Size: 62.7 KB
Posted: 4/12/04
front half of the cage coming out.		welded it up. taped off the areas that still need welding and painted it
Hits: 1556
Size: 61.58 KB
Posted: 4/12/04
welded it up. taped off the areas that still need welding and painted it		front half. you can see the gussets i used for the funky front part.
Hits: 1547
Size: 54.54 KB
Posted: 4/12/04
front half. you can see the gussets i used for the funky front part. 		finished pic..
Hits: 1587
Size: 58.57 KB
Posted: 4/12/04
finished pic.. 		shows the seatbelt mounts..
Hits: 1442
Size: 58.39 KB
Posted: 4/12/04
shows the seatbelt mounts..
finished shot with the top on..
Hits: 1588
Size: 56.85 KB
Posted: 4/12/04
finished shot with the top on..		    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog