Rafael Esqueda > 1995 Ford Bronco > open folder Full Cage

Started off by welding some 1/4" thick plates where the cage points would be. It has a nut welded to...
Url
Tag
Img
Thumb
shows the points on the body. same on the other side.
Url
Tag
Img
Thumb
Didnt have much help so i used whatever i could to mock things up..
Url
Tag
Img
Thumb
This was some of the first setup i had for the rear.. I added more to it but later changed the desig...
Url
Tag
Img
Thumb
the front cage. i wanted to be able to use my visors with the cage so i designed it around that.
Url
Tag
Img
Thumb
Worked on the spreaders. Wanted to keep the dome light so i worked in that 180* bend.
Url
Tag
Img
Thumb
triangulated the spreaders and gave them a slight bend to get them closer to the roof.. Contrary to ...
Url
Tag
Img
Thumb
shows the rear half and the seat belt mounts welded to the cage.
Url
Tag
Img
Thumb
1/2" Grade 8 bolt welded to the cage for the upper seatbelt mount.
Url
Tag
Img
Thumb
I designed the cage in 2 main pieces so that i could remove it, weld it up, paint it, slap it back o...
Url
Tag
Img
Thumb
front half of the cage coming out.
Url
Tag
Img
Thumb
welded it up. taped off the areas that still need welding and painted it
Url
Tag
Img
Thumb
front half. you can see the gussets i used for the funky front part.
Url
Tag
Img
Thumb
finished pic..
Url
Tag
Img
Thumb
shows the seatbelt mounts..
Url
Tag
Img
Thumb
finished shot with the top on..
Url
Tag
Img
Thumb
    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog