Rafael Esqueda > 1995 Ford Bronco > open folder SAS Stuff

Used 4"x8"x1/4" steel and cut them at about 15 degrees to relieve the stress on the bushing at ride ...
Url
Tag
Img
Thumb
Shows the angle.
Url
Tag
Img
Thumb
Welded a 3/16" thick plate to the top. It is then bolted and welded to the frame.
Url
Tag
Img
Thumb
For the trac bar mount i used 2.5"x2.5"x1/4" steel
Url
Tag
Img
Thumb
Chopped it up and welded it together.
Url
Tag
Img
Thumb
This just shows the piece that will be welded to the mount and connect to the crossmember under the ...
Url
Tag
Img
Thumb
I cut the opening for the bushing and marked the hole for the bolt. Also welded a piece of 1/4" thic...
Url
Tag
Img
Thumb
Welded it to the frame and then welded the brace on (not visible)
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog