|
|
Hits: 948
Size: 19.53 KB
Posted: 4/25/04
after the one ton swap, i wasnt getting the rear flex i wanted, so I made these from 1.5x3 angle iro... | 
Hits: 802
Size: 17.44 KB
Posted: 4/25/04
welded on a pice of angle on outside, so it only takes two .5" bolts to mount them together. Drille... | 
Hits: 945
Size: 71.96 KB
Posted: 4/25/04
the top of the angle is close to the uderside of the body, thats why its in two pieces. Has to be b... | 
Hits: 876
Size: 47.25 KB
Posted: 4/25/04
one of these pieces welded on either side to mount the bracket. I am still working on my welding a... | 
Hits: 984
Size: 69.75 KB
Posted: 4/25/04
these are the front shock mounts from a ttb that were cut and booger welded on (best I could do vert... |
Hits: 944
Size: 71.64 KB
Posted: 4/25/04
this is mounted up in there, painted, and flexed as in the following pics. the stuffed tire is hitt... | 
Hits: 962
Size: 57.32 KB
Posted: 4/25/04
best flex i could find when i finished the work. All tires are firmly on the ground, but without un... | 
Hits: 905
Size: 58.97 KB
Posted: 4/25/04
the 40 is fully stuffed, and hitting the inside fender well. it clears perfectly around the fender ... | 
Hits: 904
Size: 62.45 KB
Posted: 4/25/04
again, all tires firmly on the ground and no where near lift. the front tire is about 36" off the g... | 
Hits: 954
Size: 43.44 KB
Posted: 5/13/04
I reworked the front shocks while doing the dual batts and exhaust. the front is no where near comi... |
Hits: 821
Size: 40.15 KB
Posted: 5/13/04
since I put the heims in, I still need to adjust it some, as this tire is hitting a lot on the bumpe... | 
Hits: 793
Size: 33.03 KB
Posted: 5/13/04
same shot, further back | 
Hits: 827
Size: 57.45 KB
Posted: 5/13/04
thought I would get more flex, but it seems there is another bind instead of the shocks. Its the da... | 
Hits: 905
Size: 50.82 KB
Posted: 5/13/04
Guess Ill have to rework that now. | 
Hits: 854
Size: 56.71 KB
Posted: 5/13/04
about 4 inches off the ground, but hard to tell |
re-reworked rear shocks