Damon Haas > 1994 Ford Bronco > open folder re-reworked rear shocks

after the one ton swap, i wasnt getting the rear flex i wanted, so I made these from 1.5x3 angle iro...
Url
Tag
Img
Thumb
welded on a pice of angle on outside, so it only takes two .5" bolts to mount them together. Drille...
Url
Tag
Img
Thumb
the top of the angle is close to the uderside of the body, thats why its in two pieces. Has to be b...
Url
Tag
Img
Thumb
one of these pieces welded on either side to mount the bracket. I am still working on my welding a...
Url
Tag
Img
Thumb
these are the front shock mounts from a ttb that were cut and booger welded on (best I could do vert...
Url
Tag
Img
Thumb
this is mounted up in there, painted, and flexed as in the following pics. the stuffed tire is hitt...
Url
Tag
Img
Thumb
best flex i could find when i finished the work. All tires are firmly on the ground, but without un...
Url
Tag
Img
Thumb
the 40 is fully stuffed, and hitting the inside fender well. it clears perfectly around the fender ...
Url
Tag
Img
Thumb
again, all tires firmly on the ground and no where near lift. the front tire is about 36" off the g...
Url
Tag
Img
Thumb
I reworked the front shocks while doing the dual batts and exhaust. the front is no where near comi...
Url
Tag
Img
Thumb
since I put the heims in, I still need to adjust it some, as this tire is hitting a lot on the bumpe...
Url
Tag
Img
Thumb
same shot, further back
Url
Tag
Img
Thumb
thought I would get more flex, but it seems there is another bind instead of the shocks. Its the da...
Url
Tag
Img
Thumb
Guess Ill have to rework that now.
Url
Tag
Img
Thumb
about 4 inches off the ground, but hard to tell
Url
Tag
Img
Thumb

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog