BW case from mounting surface to ouptut flange face is 16.5"
Hits: 1187
Size: 51.11 KB
Posted: 3/4/05
BW case from mounting surface to ouptut flange face is 16.5"
klune/205 with 3/4 spacer beween klune and tranny, as well as klune/205 with the mounting foot (1/4"...
Hits: 1188
Size: 76.25 KB
Posted: 3/4/05
klune/205 with 3/4 spacer beween klune and tranny, as well as klune/205 with the mounting foot (1/4"...
I ended up without using a body lift, but notched the seatbelt bracket like this
Hits: 1169
Size: 57.07 KB
Posted: 3/4/05
I ended up without using a body lift, but notched the seatbelt bracket like this
Im using WFO flange (on left and 1/2" shorter) in the rear, and a Highangle flange(on right) in the ...
Hits: 1217
Size: 51.59 KB
Posted: 3/4/05
Im using WFO flange (on left and 1/2" shorter) in the rear, and a Highangle flange(on right) in the ...
another shot of the difference.  WFO's is on the left
Hits: 1097
Size: 58.79 KB
Posted: 3/4/05
another shot of the difference. WFO's is on the left
I clocked the 205 up some, which required cutting the mounting foot where the red line is, and then ...
Hits: 1613
Size: 56.84 KB
Posted: 3/4/05
I clocked the 205 up some, which required cutting the mounting foot where the red line is, and then ...
    

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog