Damon Haas > 1994 Ford Bronco > open folder doubler crossmember

full shot of rear side of mount
Url
Tag
Img
Thumb
how the kolune will mount. uses 60's chevy motor mounts and some 3/8 plate
Url
Tag
Img
Thumb
how it will mount to the frame.
Url
Tag
Img
Thumb
how the tranny will mount. Will use a piece of round tube bent in a horshoe. The tranny bolts are ...
Url
Tag
Img
Thumb
sorta how the horshoe will look
Url
Tag
Img
Thumb
whole front side of mount. Will have plenty of driveshaft clearance without notching, at least it l...
Url
Tag
Img
Thumb
drawn in second crossmember
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
this will leave room for the belly pan and should sit about level with the bottom of the frame brack...
Url
Tag
Img
Thumb
making progress. The mount is 3/8, so I figure only two gussets would be required.
Url
Tag
Img
Thumb
just need to figure this out now.
Url
Tag
Img
Thumb
in the end, i changed my mind and am going to try this. Notice here, the driveshaft clearance in th...
Url
Tag
Img
Thumb
clearance to body
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
painted and installed
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
this is the back side xmember. This will allow me a mount for a rear axle torque arm, will be the r...
Url
Tag
Img
Thumb
drivers side shot. The rear and front XM's are within an 1/8 inch from the ground of one another.
Url
Tag
Img
Thumb
I ended up keeping the e brake bracket in the stock position (except for 3/8" off the frame noe for ...
Url
Tag
Img
Thumb
its a bad pic, but the 205 hangs down about .5 inches below the XMs
Url
Tag
Img
Thumb
just a series of the stock 205 torque arm mount, that usually mounts to the 78 style frame instead o...
Url
Tag
Img
Thumb
I turned the stock lower mount 90 degrees and welded this 1/4 plate to the XM. then, using 3/8 bolt...
Url
Tag
Img
Thumb
its a close fit, but clears the 205 AND the fuel filter
Url
Tag
Img
Thumb
after paint and before install.
Url
Tag
Img
Thumb
   
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog