|
|
Hits: 2640
Size: 32.72 KB
Posted: 6/29/03
why I went for a sas | 
Hits: 2365
Size: 20.58 KB
Posted: 6/29/03
yet again | 
Hits: 2346
Size: 41.34 KB
Posted: 6/29/03
drivers side front most rivet removed. it was interfering with the bucket being mounted. It was wh... | 
Hits: 4387
Size: 82.52 KB
Posted: 6/29/03
drivers side coil bucket installed | 
Hits: 2708
Size: 62.73 KB
Posted: 6/29/03
here's bill playing with his nuts |
Hits: 3951
Size: 28.21 KB
Posted: 6/29/03
stock radius arm bracket for 79 ford, laid back approx 20 degrees. | 
Hits: 2450
Size: 29.89 KB
Posted: 6/29/03
I also added some more metal on the side of the frame rail to help spread the load since the newer f... | 
Hits: 2375
Size: 42.95 KB
Posted: 6/29/03
temporarily secured. Note how it is notched out for the body mount so I can push the axle forward t... | 
Hits: 2143
Size: 39.6 KB
Posted: 6/29/03
It should allow for a much better angle on the radius arm. Without the lay back, it would have put ... | 
Hits: 2215
Size: 47.44 KB
Posted: 6/29/03
still need steering and track bar |
Hits: 2077
Size: 36.31 KB
Posted: 6/29/03
drivers side bracket installed with 5, 1/2" bolts | 
Hits: 2016
Size: 31.3 KB
Posted: 6/29/03
radius arm angle at ride height with the laid back bracket. It is pretty a good angle | 
Hits: 2177
Size: 45.97 KB
Posted: 6/29/03
another shot of arm | 
Hits: 1984
Size: 23.63 KB
Posted: 6/29/03
drivers side tire clearance from fender | 
Hits: 1996
Size: 41.88 KB
Posted: 6/29/03
bumper clearance on drivers side |
Hits: 2047
Size: 38.45 KB
Posted: 6/29/03
driveshaft clearance | 
Hits: 1918
Size: 24 KB
Posted: 6/29/03
passenger side bracket with return fuel line | 
Hits: 2064
Size: 43.44 KB
Posted: 6/29/03
passenger side arm | 
Hits: 2002
Size: 41.2 KB
Posted: 6/29/03
passenger side again | 
Hits: 2055
Size: 30.95 KB
Posted: 6/29/03
much mo beefy than the stock crap |
Hits: 2004
Size: 40.56 KB
Posted: 6/29/03
old and new trackbars. the new stuff is much more heavy duty. got it from rockequipment.com | 
Hits: 1868
Size: 35 KB
Posted: 6/29/03
arb connection | 
Hits: 1917
Size: 42.86 KB
Posted: 6/29/03
arb line tied to breather line. They are held out of the way with a soft spring to allow for whee... | 
Hits: 1892
Size: 54.34 KB
Posted: 6/29/03
arb regulator tied into the york system | 
Hits: 1840
Size: 45.6 KB
Posted: 6/29/03
just another shot of the regulator with the diff and tranny breathers tied in behind it. |
Hits: 2002
Size: 49.02 KB
Posted: 6/29/03
bent all new brake lines since I removed the 4wabs computer. Stock ford is metric, so you need to r... | 
Hits: 2307
Size: 44.35 KB
Posted: 6/29/03
all the lines to the pumpkin | 
Hits: 4461
Size: 35.51 KB
Posted: 6/29/03
front of lower track bar mount | 
Hits: 4067
Size: 25.33 KB
Posted: 6/29/03
rear of lower track bar mount. the holes add at least 15 horse power | 
Hits: 4849
Size: 47.41 KB
Posted: 6/29/03
upper track bar mount. Welded to frame and notched for access to the gearbox bolt |
Hits: 2546
Size: 39.02 KB
Posted: 6/29/03
different angle | 
Hits: 2401
Size: 45.39 KB
Posted: 6/29/03
again | 
Hits: 2344
Size: 34.59 KB
Posted: 6/29/03
the cross memeber suport bar | 
Hits: 2076
Size: 37.35 KB
Posted: 6/29/03
again | 
Hits: 2297
Size: 36.53 KB
Posted: 6/29/03
the best i could do close to home |
Hits: 1970
Size: 35.19 KB
Posted: 6/29/03
| 
Hits: 3022
Size: 42.39 KB
Posted: 6/29/03
A big thanks to Jack for fab'ing up the mount. there is no bumpsteer. | 
Hits: 2198
Size: 34.21 KB
Posted: 6/29/03
Gusseted the radius arm bracket after it started cracking on the ramsey trail. this should fix any ... | | |
SAS