Damon Haas > 1994 Ford Bronco > open folder SAS

why I went for a sas
Url
Tag
Img
Thumb
yet again
Url
Tag
Img
Thumb
drivers side front most rivet removed. it was interfering with the bucket being mounted. It was wh...
Url
Tag
Img
Thumb
drivers side coil bucket installed
Url
Tag
Img
Thumb
here's bill playing with his nuts
Url
Tag
Img
Thumb
stock radius arm bracket for 79 ford, laid back approx 20 degrees.
Url
Tag
Img
Thumb
I also added some more metal on the side of the frame rail to help spread the load since the newer f...
Url
Tag
Img
Thumb
temporarily secured. Note how it is notched out for the body mount so I can push the axle forward t...
Url
Tag
Img
Thumb
It should allow for a much better angle on the radius arm. Without the lay back, it would have put ...
Url
Tag
Img
Thumb
still need steering and track bar
Url
Tag
Img
Thumb
drivers side bracket installed with 5, 1/2" bolts
Url
Tag
Img
Thumb
radius arm angle at ride height with the laid back bracket. It is pretty a good angle
Url
Tag
Img
Thumb
another shot of arm
Url
Tag
Img
Thumb
drivers side tire clearance from fender
Url
Tag
Img
Thumb
bumper clearance on drivers side
Url
Tag
Img
Thumb
driveshaft clearance
Url
Tag
Img
Thumb
passenger side bracket with return fuel line
Url
Tag
Img
Thumb
passenger side arm
Url
Tag
Img
Thumb
passenger side again
Url
Tag
Img
Thumb
much mo beefy than the stock crap
Url
Tag
Img
Thumb
old and new trackbars. the new stuff is much more heavy duty. got it from rockequipment.com
Url
Tag
Img
Thumb
arb connection
Url
Tag
Img
Thumb
arb line tied to breather line. They are held out of the way with a soft spring to allow for whee...
Url
Tag
Img
Thumb
arb regulator tied into the york system
Url
Tag
Img
Thumb
just another shot of the regulator with the diff and tranny breathers tied in behind it.
Url
Tag
Img
Thumb
bent all new brake lines since I removed the 4wabs computer. Stock ford is metric, so you need to r...
Url
Tag
Img
Thumb
all the lines to the pumpkin
Url
Tag
Img
Thumb
front of lower track bar mount
Url
Tag
Img
Thumb
rear of lower track bar mount. the holes add at least 15 horse power
Url
Tag
Img
Thumb
upper track bar mount. Welded to frame and notched for access to the gearbox bolt
Url
Tag
Img
Thumb
different angle
Url
Tag
Img
Thumb
again
Url
Tag
Img
Thumb
the cross memeber suport bar
Url
Tag
Img
Thumb
again
Url
Tag
Img
Thumb
the best i could do close to home
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
A big thanks to Jack for fab'ing up the mount. there is no bumpsteer.
Url
Tag
Img
Thumb
Gusseted the radius arm bracket after it started cracking on the ramsey trail. this should fix any ...
Url
Tag
Img
Thumb
  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog